How big were the Pistons on the Titanic?
How big were the Pistons on the Titanic?
2. The steam exits the HP cylinder, and is routed to the next cylinder along, the slightly larger intermediate pressure (IP) cylinder, moving the piston in the cylinder. 3….Titanic’s Engines.
Engine Statistics | |
---|---|
Weight | 1,000 tons |
Height | 30 feet |
H.P. Cylinder Diameter | 54 inches |
I.P. Cylinder Diameter | 84 inches |
What engines were on the Titanic?
Titanic was equipped with three main engines—two reciprocating four-cylinder, triple-expansion steam engines and one centrally placed low-pressure Parsons turbine—each driving a propeller. The two reciprocating engines had a combined output of 30,000 horsepower (22,000 kW).
How much torque did the Titanic have?
The turbine was designed to develop about 16,000 shaft horsepower (SHP) when running at 165 revolutions per minute. At those numbers of revolutions, the ship was expected to make 21 knots. Titanic'”s propelling machinery was registered at 50,000 horsepower.
What was the propulsion system of the Titanic?
The Parsons turbine, which was fed by exhaust steam from the reciprocating engines, was a low-pressure reaction type. Each reciprocating engine drove one 3-bladed wing propeller of 23 feet diameter, one on the port side of the vessel, and the other on the starboard side of the vessel.
How did the steam engine work on the Titanic?
One of Titanic’s massive engines lies almost compete in the Harland and Wolff Machine Shop. A triple-expansion steam engine works by re-using steam that would otherwise be wasted as exhaust, like in a steam locomotive, or it would be returned to the condenser, to be turned back into water to be used again.
What was the total horsepower of the Titanic?
The turbine, which drove the center propeller, utilized the exhaust steam from the other engines. This design recycled the exhausted steam instead of wastefully venting it up the funnels. The result: an increase in efficiency. The total horsepower of the engines was 51,000.
How does the piston work in a marine engine?
Pistons are key components of marine engines. It work by transferring the force output of expanding gas in the cylinder to a crankshaft. Pistons are directly exposed to heat and gas load, so the material of the piston is not only thick enough to bear the mechanical load but also thin enough to minimize the thermal stress.