How do I set an Extension Mobility on Cisco Callmanager?
How do I set an Extension Mobility on Cisco Callmanager?
To configure Extension Mobility, so the end user may use it, perform the following:
- On CUCM Administration page, from the menu select, Device > Phone.
- Click Find.
- On Find and list phone page, click on Phone1.
- Enable Extension mobility and for the logout profile use Use Current Device Settings.
- Click Save and Reset.
What is Cisco Mobility Extension?
Cisco Extension Mobility allows users a temporarily access their Cisco Unified IP Phone configuration such as line appearances, services, and speed dials from other Cisco Unified IP Phones. Extension Mobility supports Cisco Unified IP Phones that run SCCP and SIP.
How do I enable mobility extension?
Select the phone from the list of devices. In the pop-up window, under Service Information, in the Select a Service pull down menu, select Extension Mobility. Close the pop-up window. Under Extension Information, check the Enable Extension Mobility box.
How do I program a Cisco phone extension?
Procedure
- Step 1: Connect the phone to the network.
- Step 2: Dial the Extension Assigner directory number 70000; When prompted for password, enter 1234.
- Step 3: Enter the pound (#) key.
- Step 4: Enter the permanent extension that has been configured on the portal for this user followed by the pound (#) key.
How to enable extension mobility in Cisco Unified Communications?
Extension mobility functionality extends to most Cisco Unified IP Phones. Check the phone documentation to verify that Cisco Extension Mobility is supported. Generate a report to identify devices that support the extension mobility feature.
How to access Cisco CallManager Extension Mobility Web site?
Access the service from the services button on the phone or downgrade the phone firmware to 9-0-2SR2 or earlier. If you are running Cisco CallManager Extension Mobility on an IBM-340 platform, check that the system allows anonymous access to the Login Service web site.
How to configure Cisco Unified Communications Manager release 12.5?
From Cisco Unified Serviceability, choose Tools > Service Activation. From the Server drop-down list, choose the requried node. You must choose publisher node to activate the ILS services. Click Save. Click OK . Configure the extension mobility IP phone service to which users can later subscribe to access extension mobility.
How is a phone configured for extension mobility?
When a phone is configured for Extension Mobility, the administrator must choose to Use Current Device Settings or Select a User Device Profile for the logout profile. If you choose Use Current Device Settings, the system creates the file ADPxxxxxxxxxxx.cnf, where xxxxxxxxxxx is the MAC address of the device configured for Extension Mobility.