Does VMware support SR-IOV?

A: The support model for the SR-IOV enabled adapters is the same as for any certified drivers. The VMware Global Support Services (GSS) organization provides support for this feature as well as patches and updates.

Should I enable or disable SR-IOV?

The SR-IOV (Single Root I/O Virtualization) interface is an extension to the PCI express (PCIe) specification. Enabled—Enables a hypervisor to create virtual instances of a PCIe device, potentially increasing performance. Disabled—Does not enable a hypervisor to create virtual instances of a PCIe device.

What is SR-IOV VMware?

Virtualization! SR-IOV is the next level to PCI passthrough. Instead of assigning exclusive right of the device to the VM directly, the device (Physical Function) is shared or ‘partitioned’ (Virtual Function). Once partitioned, it is shared among multiple VMs.

How do I know if SR-IOV is enabled?

Verify support Verify if the PCI device with SR-IOV capabilities is detected. This example lists an Intel 82576 network interface card which supports SR-IOV. Use the lspci command to verify whether the device was detected.

How to enable SR-IOV in vSphere web client?

For example, if you are using the vSphere web client: Go to the host with the SR-IOV physical network adapter that you want to add virtual interfaces to. In the Networking part of the Manage tab, select Physical Adapters. Select the physical adapter for which to enable SR-IOV settings.

What does SR-IOV mean for VMware ESXi?

Enabling SR-IOV means that one PCIe network card or CPU can function for a FortiGate-VM as multiple separate physical devices. SR-IOV reduces latency and improves CPU efficiency by allowing network traffic to pass directly between a FortiGate-VM and a network card, bypassing VMware ESXi host software and without using virtual switching.

How to enable SR-IOV on a pci adapter?

To enable SR-IOV on a physical adapter in vSphere client: Navigate to the host in the left navigation pane and click the Manage tab. Go to Hardware tab. Under PCI Devices option, select the physical adapter and click Configure SR-IOV option.

How to enable SR-IOV on FortiGate VM?

Power off the FortiGate-VM and open its virtual hardware settings. Create or edit a network adapter and set its type to SR-IOV passthrough. Select the physical network adapter for which you have enabled SR-IOV. Optionally associate the FortiGate-VM network adapter with the port group on a standard or distributed switch.

https://www.youtube.com/watch?v=EJyOeT0XGcA