How do I install a second hard drive in Windows XP?

Installing Windows XP

1. Make sure your BIOS is configured to boot from the CD.
2. Put your Windows XP CD in the drive and press a key when you see the “Press any key to enter Windows Setup…” message.
3. If you’re installing Windows XP to a SATA drive, make sure you hit F6 to load the SATA drives.

How do I add a second SATA hard drive?

Attach the second hard drive to the power supply. Plug one end of the second hard drive’s power cable into the power supply box, then plug the other end into your second hard drive. You’ll usually find the power supply at the top of the computer case. The power supply cable resembles a wider SATA cable.

Can I install 2 HDD in 1?

You can install additional hard disks on a desktop computer. This setup requires that you set up each drive as a separate storage device or connect them with a RAID configuration, a special method for using multiple hard drives. Hard drives in a RAID setup require a motherboard that supports RAID.

How do I install Windows XP on a SATA hard drive?

At this point press the F6 button. When the next screen appears press S to specify an additional device. Now insert the floppy disk containing the SATA drivers into your floppy drive. Windows will next ask you to select a driver from the provided list.

How to install a second SATA hard drive?

How to install a secondary SATA hard drive. If both your hard drives are SATA then what you will do is use a SATA cable numbered “1” for your primary hard drive. Use SATA cable numbered “2” for your secondary drive old. SATA cables are marked with numbers. Try to boot your computer up with your drives set this way and it should work.

Can you install Windows XP on a Serial ATA drive?

Serial ATA (SATA) drives are the latest in the hard drive fashion and, in theory, installing Windows on the drive should prove relatively simple. The problem is that Windows XP doesn’t contain the necessary drivers to allow windows to see the drive so that Windows can install it.

Which is the best SATA driver for Windows XP Pro SP2?

Windows XP Pro SP2 fares well with SATA drivers, but here is what can be done in cases where the driver is not recognised. Above all, it is necessary to get the latest stable Serial ATA drivers for your motherboard. To do this, it is essential to know the exact model of motherboard.