How to Reset router to factory settings?

How to reset your router to restore factory default settings

1. Locate the Reset button on the back of your router.
2. With the router powered on, use the pointed end of a paperclip or similar object to press and hold the Reset button for 15 seconds.
3. Wait for the router to fully reset and power back on.

How do I Reset my Linksys?

Locate the Reset button and, using a pen or a paper clip, press and hold the Reset button for 10 seconds. QUICK TIP: For router models such as the Linksys Wireless-B and Wireless-G routers, press and hold the Reset button for 30 seconds. QUICK TIP: Observe the Power light of the router while pressing the button.

How do I Reset my Linksys ATA?

Factory Reset Linksys PAP ATA

1. Connect an analog phone to any of the phone ports on the ATA.
2. Dial * four times.
3. Dial a special sequence 73738#. The ATA responds with “Press 1 to confirm or Press * to exit.”.
4. To confirm the factory reset dial 1.

How do I Reset my Linksys SRW2048?

To reset Linksys SRW2048 router,

1. Turn on the Linksys SRW2048 router.
2. Look for the reset button, Few routers have a tiny hole and few others have a reset button.
3. Press the Factory reset button with a straightened paperclip pin or something that gets through the tiny hole, and hold it for about 15 seconds!

What happens if I reset my Linksys router?

Resetting your router will clear all your home networking settings and will change all of your settings back to the defaults. The location of the Reset button may vary for every model. Older Linksys devices may require pressing and holding the Reset button for 30 seconds to complete the reset process.

How do I access ATA?

In the ATA Center server, click the Microsoft ATA Console icon on the desktop or open a browser and browse to the ATA Console. You can also open a browser from either the ATA Center or the ATA Gateway and browse to the IP address you configured in the ATA Center installation for the ATA Console.

How do I find my Linksys pap2t IP address?

At the voice prompt, dial 110# and you should hear the IP Address of the unit. Go to a web browser and type in the IP Address like so: http://IP_ADDRESS/admin/advanced. The administration screen of the Linksys should be displayed.

Is it bad to factory reset your router?

It might also be a good idea to upgrade your router’s firmware and see if that fixes the problem. A factory reset is a good idea if you’re selling or disposing of your router. This way, whoever gets your router next can start fresh, without seeing any of your personal information (like your Wi-Fi passphrase.)

Is resetting your router bad?

Routers, like computers, work best with regular hard resets. Resetting a router can also clear the memory, which is critical for those with multiple devices or an older router. Resetting your router is an easy way to prevent malware attempts – the FBI even recommends router resets for that reason.

Does Resetting router reset Wi-Fi password?

NOTE: Resetting your router to its default factory settings will also reset your router’s password. The router’s default password is “admin” as for the username, just leave the field blank.

How to reset Linksys SPA2102 VoIP router ATA to factory?

You should hear a voice say “Entering Linksys Configuration Menu”. Next, press 73738# and you will hear a voice ask you to press 1 to confirm. Press 1 when prompted. This sets the device to factory defaults and reboots it. http://www.buybuyseller.com/ linksys-spa2102- voip-router- a…

How to reset the ATA on a Linksys router?

This means we can access the configuration menu to reset the device. Pick up the phone that you just connected to the ata and press the * key 4 times. You should hear a voice say “Entering Linksys Configuration Menu”.

Where do I plug in my SPA2102 router?

After you do this you should have access to the device at 192.168.1.37 with your PC plugged into the router. If you wish to access the Web Server from a PC plugged into the ethernet port of the SPA2102, plug the PC in and then “Repair” the network connection.

What does the linksys PAP2 VoIP adapter do?

The Linksys Pap2 is an analog telephone adapter (ata) that allows you to make voip phone calls over the Internet. Learn how to reset the device to factory defaults. The Linksys ATA device has a really cool configuration menu that we access via a phone connected to the device, so lets set that up first.