What kind of wood should I use for a wooden planter?

What sort of wood should I use to build my planter box? Cedar, redwood, and pressure-treated woods are all great choices. Cedar and redwood are both naturally resistant to insects and weathering.

Do I need to line a wooden planter?

You need to line your planter box if it’s made from wood or metal. The liner will help prolong the planter’s life. You don’t need to use a liner if the planter is made using plastic, ceramic, or concrete as they are quite durable by themselves.

How deep should a planter box be?

Eight to 12 inches is usually adequate. If drainage is a problem, or if the plants you are growing prefer drier soil, the bed could be taller and filled with a porous growing medium. Vegetable beds should be 12 to 18 inches deep. The material used to edge a raised bed should be stable, durable and attractive.

How do you line wooden planters?

Line the entire planter with a sheet of plastic, trimming it so that it reaches but does not go over the rim. Staple the plastic all the way around the rim. Using a screwdriver or sharp stick, poke through the drilled drainage holes to let excess water drain out of the plastic liner.

What is the best wood to use for planter boxes?

There are several types of lumber to choose from:

• Pressure treated or composite boards are chemically treated to resist termites, mold and other damage.
• Cedar, white oak and redwood naturally resist termites and other insects.
• Soft woods such as pine work best for indoor planters.

How do I make wood planters?

Here are brief steps to build this wooden planter box. Design the frame for the base by hammering together all pieces. Place the bottom piece of lumber inside the frame. Add four pieces of lumber at every corner of frame. Take measuring tape and pencil to mark the posts where you will add additional slats. Nail all the slats.

How thick should the wood in a planter box be?

Materials and tools for one wood planter box: Wood: 1/4″ thick plywood ( more in Step 1 ) cut to (4) 20″x20″ panels, and ( 16 ) 1″x20″ strips. Drill, 1″ flat wood screws and 1.5″ flat wood screws, a circular saw or jig saw, a couple of large Spring Metal Clamps, and bar clamps, which are my must Exterior wood glue, paint and / or outdoor sealer, brushes or paint sprayers.

What’s the best wood for planter boxes?

Teak. Teak is a commonly used wood for outdoor furniture and planters.

How do you make a vegetable garden box?

Prepare the vegetable garden box. Drill drainage holes into the base of the box that cover the entire base. Cover the base with an inch of gravel to help with drainage. Fill the box with potting soil up to an inch of the lip. Keep the soil even and loose. Add organic compost using a ratio of 3-to-1 soil-to-compost mix.