How do you load staples?

Insert the strip of staples, points down, into the staple channel and close the top of the stapler, the magazine will slide back into its correct position and you’ll hear a small click. Some of our staplers, such as the Zero 01 or our range of Heavy Duty staplers, are front loading.

How do you load staples in a Bostitch heavy duty stapler?

Ensure the handle safety is on and the handle is locked down. Release the loading latch at the end the stapler and pull the slide open. Lay a stick of staples in the loading channel with the legs of the staples facing up. Push the slide in until the loading latch clicks and catches.

What are 5 uses of a stapler?

Interview Answers

• stapling papers together (Staplers don’t use pins…they use staples).
• hemming pants that are too long.
• nailing co-workers to the cubical wall 4) melting it down and casting 25 mm figures for wargames 5) Sell it on Craigslist to someone that has staples but no stapler.

How do you measure staples?

Staples are often described as X/Y (e.g. 24/6 or 26/6), where the first number X is the gauge of the wire (AWG), and the second number Y is the length of the shank (leg) in millimeters.

How do you load a stapler into a gun?

Place your thumb and forefinger on either side of the release, and press in before pulling out. This will release the magazine from the gun, revealing a compartment underneath of the gun where you’ll place the staples. If you haven’t already, you will need to lay the stapler on its side or hold it upside-down to load the staples into the gun.

How do you get staples out of a staple gun?

If you’re having trouble finding it, trace from where the staples come out of the gun to the rear area, which is usually a straight line. Push in on the rod and pull it out to remove it. Place your thumb and forefinger in the indentations on either side of the pusher.

How can I keep the top of my stapler in place?

Many of our staplers feature a safety lock-back feature to keep the top of the stapler in place. Insert the strip of staples, points down, into the staple channel and close the top of the stapler, the magazine will slide back into its correct position and you’ll hear a small click.

Where is the magazine release on a staple gun?

The magazine release is a button that releases clip that holds the staples in place. Look at the rear part of the stapler, toward the bottom. It should have 2 small indentations on either side of the stapler for you to squeeze and pull. If you don’t know where your magazine is located, find where the staples come out of the gun.