What pressure should my Fox forks be?
What pressure should my Fox forks be?
Sag should be set to 15 – 20% of total fork travel
| Suggested Starting Points for Setting Sag | ||
|---|---|---|
| Rider Weight (lbs) | Rider Weight (kgs) | 34 FLOAT Pressure (psi/ bar) |
| 130-140 | 59-64 | 63psi/ 4.3 bar |
| 140-150 | 64-68 | 68psi/ 4.7 bar |
| 150-160 | 68-73 | 72psi/ 5.0 bar |
How do I adjust Fox Float DPS?
Setting Shock Air Pressure
- Turn the 3-position lever to the OPEN mode.
- Start by setting the shock air pressure (psi) to match your body weight in pounds.
- Remove the pump.
- Sit still on the bike in your normal riding position, using a wall or a tree for support.
What’s the adjust setting on a Fox Fork?
OPEN mode adjust provides 22 additional fine tuning adjustments for the OPEN mode. Setting 22 will have a more plush feel and setting 1 will have a firmer feel. FOX recommends beginning with the Open mode adjust set to 18 clicks out (counter-clockwise) from fully closed (clockwise).
How do you adjust the rebound on a Fox?
The rebound adjustment is dependent on the air pressure setting. For example, higher air pressures require slower rebound settings. Use your air pressure to find your rebound setting. Turn your rebound knob to the closed position (full clockwise) until it stops. Then back it out (counter-clockwise) to the number of clicks shown in the table below.
What should the SAG be on a Fox suspension?
To achieve the best performance from your FOX suspension, adjust the air pressure to attain your proper sag setting. Sag is the amount your suspension compresses under your weight and riding gear. Sag range should be set to 25–30% of total shock travel. Watch the sag setup video at ridefox.com/sagsetup 1.
What’s the maximum air pressure on a Fox Fork?
2021 36 FLOAT maximum air pressure is 120psi (8.3 bar) 2021 38 FLOAT maximum air pressure is 140psi (9.6 bar) NOTE: Pressure measured at an ambient temperature of 70-75ËšF. Normal operating temperature range for FOX products is 20-140ËšF.