How do I adjust my door closer to stay open?

How to Adjust a Hold-Open Door Closer

1. Adjust the closer on its bracket. Slide the door stop to the end of its bar with the door in the open position.
2. Set the backcheck range for the door.
3. Locate the swing adjustment.
4. Find the latch adjustment next to the swing adjustment.
5. Check the door’s operation.

Who makes LCN door closers?

the Allegion group of companies
LCN is a door hardware brand within the Allegion group of companies. With more than 27 brands sold in over 120 countries, Allegion is pioneering safety as a provider of security solutions for homes and businesses around the world. LCN manufactures a full range of top-quality door closers and openers.

Where are LCN Closers manufactured?

Princeton, IL
insider. Look inside the LCN plant in Princeton, IL, USA as our dedicated employees discuss the shared commitment to quality and recent investments in state-of-the-art manufacturing technology.

What should I do if my door closer is not working?

Adjustment Instructions here are for a properly functioning door closer. If your door closer is not functioning properly, see Troubleshooting section before adjusting. Adjustment screws usually require a hex wrench. Your closer may have a cover that must be removed before you can access the adjustment screws.

How are door closers matched to their application?

Door closers are matched to their application, based on door size and weight, and the corresponding strength needed to close them properly. Adjustable Spring tension allows models so equipped to work well for doors of sizes within their range of adjustment. The operation of a door is controlled by the Door Closer in 3 basic zones: Adjustment

Do you need a hex wrench to adjust a door closer?

Adjustment screws usually require a hex wrench. Your closer may have a cover that must be removed before you can access the adjustment screws. Do not unscrew the adjustment screws, they will fall out, and oil will spill! Generally, turning a screw Clockwise will increase resistance or slow the door, Counter-Clockwise will do the opposite.

What to do if Senior swing door does not close?

First, turn off the power to the Senior Swing. If the door closes, check controller for a constant activation signal from an activation device. If door continues to hang up and will not close, unplug the motor connector from the control box. If the door closes, control box is defective, and must be replaced.