Is monokote fireproofing toxic?

This material used to be quite dangerous because of its asbestos content. Currently produced fireproofing has little or no asbestos, but contains other potentially toxic products. What is in Spray-On Fireproofing? Product Manufacturer Ingredients Monokote MK-6 WR Grace Primarily calcium sulfate (a dry form of gypsum).

How is monokote applied?

MONOKOTE® Patch Compound is hand-applied directly to the steel and/or well-bonded material using standard plastering tools and techniques. It has excellent bonding characteristics; it can be applied up to one inch per pass.

How do you mix Monoprote fireproofing?

MONOKOTE® Fireproofing shall be mixed by machine in a conventional, plaster-type mixer or a continuous mixer specifically modified for cementitious fireproofing. The mixer shall be kept clean and free of all previously mixed material.

Can monokote Mk 6 be painted?

PHYSICAL/CHEMICAL PROPERTIES Monokote MK-6s and MK-6/HY Structural Steel Fireproofing exhibit the properties indicated in Table 1. FIRE RATING Underwriters Laboratories, Inc. Installation PREPARATORY WORK Steel must be free of oil, grease, loose mill scale, paint or any other substance that can impair proper adhesion.

What kind of fire protection is Graco XM PFP?

Designed for the application of epoxy intumescent fire protection coatings, the Graco XM PFP is the first and only system that is ATEX and IECEx certified for use in explosive atmospheres; it is rated for both electrical and mechanical construction.

What do you need to know about Tremco firestopping?

Fire containment products that may be used in conjunction with other Tremco products to provide a complete firestop system for enhanced fire resistance, a thermal insulation barrier and high impact resistance. Tremco firestopping devices consist of a metal restricting collar that helps fabricate firestop device to fit a hub or uncommon pipe size.

What do you need to know about firestop and fire protection?

Pre-formed, fast-to-install firestop solutions for cable, pipe and mixed penetrations. Designed for easy repenetration while reducing dust and airborne fiber particles Designed as a faster, simpler and no-mess solution to provide excellent fire, smoke and acoustic ratings. Minimize installation errors and waste while saving money

Why do we need pre formed firestop sleeves?

Pre-formed and easy-to-inspect firestop sleeves for cable penetrations. Designed for buildings in which airflow control and cost-effective maintenance is key, such as hospitals and data centers Pre-formed, fast-to-install firestop solutions for cable, pipe and mixed penetrations.