Users' questions

How many inches high should the stairs handrail be on a deck?

How many inches high should the stairs handrail be on a deck?

34 inches high
Deck stair railing should stand at least 34 inches high, measuring vertically from the nose of the stair tread to the top of the rail. The IRC specifies that deck stair railing should measure between 34 and 38 inches high, so homeowners may wish to use railing that is even higher than 34 inches for their deck stairs.

What is code for deck railing?

The IRC requires guardrails to be at least 36″ in height, measured from the deck surface to the top of the rail. Commercial decks attached to multi-family buildings, such as apartment buildings or businesses, are regulated under the International Building Code (IBC). The IBC requires 42″ high guardrails.

How do you build stairs on a deck?

The first step in building stairs for a deck is finding the total rise or overall vertical height the stairs have to cover. Lay a straight board on top of the deck, extend it from the edge, then measure down to the landing location. Let’s say the total rise is 57 in. The next job is to find the rise of each step.

What are the steps to building a deck?

Steps in the Construction of Deck & Porch Steps or Stairs Step 1. Get the Tools You’ll Need to Layout the Deck Stairs + Stair Gauges, also referred to as Stair Lugs, Nuts, or Spuds. Step 2: Make a Drawing of the Stairs to Show Rise, Run, Layout Step 3: Buy the Lumber & Hardware You’ll Need for the Deck or Porch Stairs

How do you build a stair rail?

How to build stair railing. First, build a level landing pad for the stair stringers. You don’t need to pour a footing. Just dig out and compact a minimum 4-in. thick gravel base, then pour a concrete slab or lay paving stones. Lay out and cut the stringers.

How do you build outdoor stairs?

How to Build Outdoor Wood Steps Use pea gravel and wood posts to build steps in your yard. Stairs are the number-one way to get from one level of a building to another. Make a new staircase by building new baluster spindles and newel posts. Once you have installed stairs, you can finish them by adding hardwood.