How do I factory reset my IBM ThinkPad?

Press the “F11” key after the ThinkPad Recovery Menu appears. Enable the “Restore Factory Defaults” option and follow the on-screen instructions to reinstall and customize your Windows operating system. The restore process also reinstalls other third-party software included on the computer when you first purchased it.

Where is the reset button on a Lenovo ThinkPad?

The reset button is accessed through a small hole next to one of the case screw locations on the bottom of the system, near the center of the system. The reset button hole can be used in the following situations: A unit will not power on, either on battery or AC power.

How do I reset my BIOS password IBM ThinkPad?

If both the power-on password and the supervisor password are set, do the following to remove the passwords:

1. Press and hold F1 to power on the computer.
2. Enter the supervisor password.
3. Click the Password icon.
4. Click the Power on icon.
5. Enter the supervisor password and press the Space bar.
6. Press Enter twice.

How do you reset a locked BIOS?

On the computer motherboard, locate the BIOS clear or password jumper or DIP switch and change its position. This jumper is often labeled CLEAR, CLEAR CMOS, JCMOS1, CLR, CLRPWD, PASSWD, PASSWORD, PSWD or PWD. To clear, remove the jumper from the two pins currently covered, and place it over the two remaining jumpers.

How do I reset a Lenovo laptop to factory settings?

How to Reset Your Lenovo Laptop While Saving Files

1. From the Start menu, go to Settings > Update & Security.
2. Choose Recovery and under Reset this PC, select Get Started.
3. Choose Keep my files to save your documents.
4. You’ll see a message saying This won’t take long as the system readies your machine for a reset.

What is restore factory keys in BIOS?

Once you’re in, you might see a key at the bottom that says Setup Defaults — F9 on many PCs. Press this key and confirm with Yes to restore the default BIOS settings. On some machines, you may find this under the Security tab. Look for an option like Restore Factory Defaults or Reset All Settings.

How do I force a Lenovo to reset?

How to do a “hard reset” on many laptops

1. Power off your laptop.
2. Disconnect AC adapter (if it’s connected).
3. Take off the battery.
4. Press and hold power button several time for several seconds each time.
5. Release power button.
6. Put in back the battery and reconnect AC.
7. Power on.

How do I force restart my Thinkpad?

Press and hold the power key for up to 30 seconds to perform a force reboot on the device. Tip: If reboot was not successful you should attempt the reboot while connected to a wall charger.

How to reset BIOS settings in systems with..?

Power on the system. In some systems, you might need to enter BIOS to reset to the factory defaults. Turn off all peripheral devices connected to the computer. Disconnect the power cord from the AC power source. Remove the computer cover. Find the battery on the board.

How to restore BIOS setting on ASUS motherboard?

Re-connect the power and boot the device, press Delete to enter BIOS for setting Note : Please refer to manual on product support page for exact CLRTC position on each motherboard 2. Enter BIOS and press F5 for default setting. Choose Yes then BIOS will return to default value.

How do I clear BIOS setting on my Motherboard?

1.Use the CLRTC header on motherboard to clear BIOS setting. Three methods are suggested below according to different motherboards: a. Two pins are on CLRTC. Please touch two pin feet for around 5-10 seconds by conductor like screwdriver at the status of shutdown with power cable removed.

How can I Reset my IBM IMM password?

Reset IMM Password Remotely. Remotely connect to your IBM server Download the IBM ASU Utility (Note: There’s an x64 bit version, and an x32 bit version, run the correct one to extract the tools). Note: If it returns a different username you can check each login ID and reset them one by one.