How do you reset MFC toner?

How to Reset Toner on Brother MFC-L2710dw, TN-760 Toner

1. Open front cover of printer (to reveal the cartridge mechanism) and “Front Door Open” will flash on the display.
2. Next, press STOP/EXIT and CLEAR at the SAME TIME (one quick press)
3. Immediately after, press CLEAR once again.
4. A menu called RESET MENU will appear.

How do I reset my Brother printer color?

Brother Color Printer Low Toner Override

1. Kindly make sure that your printer is turned on.
2. Open the toner access door.
3. Press the Clear/Back button to reach the Reset Menu.
4. Select your reset option on the Reset Menu.
5. Choose the correct size and color of the toner cartridge you want to reset.
6. Press OK after making your choice.

How do I reset my MFC L2700dw toner?

Reset Brother MFC-L2700dw Toner:

1. Open the front cover and leave open while completing the following steps.
2. Display should read “Front Cover open”.
3. Hold the ‘OK’ button down for a few seconds.
4. Display should read “Replace Drum”.
5. DO NOT follow prompts on screen.
6. Type in * 0 0 (Star Zero Zero) on the keypad.

How do I refresh my toner?

To refresh the toner:

1. At the printer control panel, press the Home button.
2. Touch Device > Support > Toner Refresh.
3. To perform a Toner Refresh process, touch Start.
4. At the successfully completed prompt, touch Close.
5. To exit the menu, touch X.
6. To return to the Home screen, press the Home button.

Why does my Brother printer say no toner?

The message ‘No Toner’ indicates that the toner cartridge or the toner cartridge and drum unit are not installed correctly. 1. Open the front cover and remove the drum and toner assembly. We recommend that you place the toner and drum assembly on a piece of paper in case they accidentally spill or scatter toner.

Can you override Brother printer toner low?

Resetting the counter will allow you to override the error and continue using the toner cartridge – If you do reset the counter for this reason, the printer may not advise when it is low. You will need to monitor your printouts and replace the cartridge when you see a deterioration in the overall quality.

Why does my printer keep saying replace toner?

The message “Replace Toner” is intended to alert you that the toner cartridge has reached the end of its expected life. When replacing the toner cartridge, you MUST install a brand new, unused genuine Brother toner cartridge in order to reset the “Replace Toner” status.

Why does my printer says replace toner?

How do you reset a brother mfc-7220 drum?

Press Options on the control panel. NOTE: The layout of a control panel differs depending on the model, but the Options button is located on the near side of the LCD screen as shown in illustration. Do one of the following. Press 1 to reset the drum counter. Press the UP ARROW key to reset the drum counter.

How to fix brother MFC printer error messages?

This video will show you how to fix one of the Brother printer error messages. When replacing a Brother toner cartridge you may find that you need to reset the printer to correctly read you have just inserted a full toner cartridge. SuppliesOutlet attained permission from freepublicmusic.com for the audio used in this video. Loading…

Do you need to reset a brother toner cartridge?

When replacing a Brother toner cartridge you may find that you need to reset the printer to correctly read you have just inserted a full toner cartridge. SuppliesOutlet attained permission from freepublicmusic.com for the audio used in this video. Loading…

What to do when toner counter is reset?

Do not type 1 or 2, this is not the command you should enter. Instead type *00 on the keypad and you should be rewarded with the word “accepted”. 4. Close the front door. The toner counter is then reset. Good luke! Loading…