Does the xenyx Q802USB have phantom power?

The 8-input, 2-bus XENYX Q802USB can accommodate either a dynamic or condenser microphone, thanks to available Phantom Power.

Are Behringer xenyx any good?

The USB and audio interface, 2 mic inputs, and 4 line inputs make this mixer so versatile – the applications for it are limitless (check the Who It’s For section for examples). Overall, this is the cheapest entry-level mixer in the market and yet it offers many features so you get more than what you paid for.

Is a mixer an audio interface?

What is the basic difference between an audio interface and a mixer? Basically, an audio interface is designed to record clean signals onto your computer on separate tracks. The mixer is designed to mix multiple audio sources into one stereo stream.

How do I connect my USB to my computer with a mixer?

PC USB Mixer Set Up Configuration

1. Plug your USB mixer USB cable into the USB port in your PC computer.
2. Windows should automatically recognize your device as “USB Audio Device” or as “USB Audio CODEC” – and it should automatically install any necessary drivers.

Are xenyx preamps any good?

The new mic preamps sound both very low in noise and uncoloured to my ears, and there’s also a sensible amount of headroom. Whilst only the main the inputs and outputs are balanced, hum and noise was not an issue, and the new EQ sounds pretty good, with a nice warmth and clarity to it.

How do I connect my Soundcraft mixer to my computer?

How to connect a mixer to your computer. You will need a dual RCA to mini plug (1/8-inch) cable to connect a mixer to the line input port on your computer. Then, you plug in the RCA plug into the RCA output jacks on the back of the mixer. Then plug the stereo mini plug into the line input port on your computer.

How do I connect my amp to my computer for recording?

How to Connect a PC to an Audio Amplifier

1. Turn the amplifier and computer off.
2. Locate the PC’s audio connectors.
3. Locate the RCA audio connectors on the back of the amplifier.
4. Turn the amplifier on.
5. Turn the computer on.
6. Play a music selection through your favorite media program.
7. Turn the amplifier and computer off.

Is mixer better than audio interface?

A USB mixer will generally have more hardware controls than an audio interface. But usually you will only record a stereo stream from a USB mixer – which will be a mix of all your audio inputs. (Unless you buy a higher end USB mixer with multiple outputs).

Is the Behringer xenyx q802usb a 3 band EQ?

Neo-classic “British” 3-band EQs for warm and musical sound Behringer based this XENYX Q802USB mixer on the distinct and famous British sound that took the rock and roll world by storm in the 60’s and 70’s. The Q802USB Equalization is based on the same circuitry of those legendary British consoles.

Can you use audacity with the xenyx q802usb?

I personally use Audacity with this mixer, but that’s only because it’s what I’m accustomed to. What’s good about the Xenyx Q802USB is it works with any other DAW so if you want to use Garage Band, Adobe Audition, or anything else, then there should be no problem.

Is the Behringer q802usb a one knob mixer?

Behringer boasts this one-knob functionality in their XENYX Q802USB mixer. And I have to say – they have every reason to. All single-knob or one-knob compressors allow even new audio technicians like me to achieve compression settings as if a seasoned sound engineer meticulously set it up.

Is the Behringer xenyx an analog mixer?

This is an analog mixer, but it has a USB interface that allows you to connect it directly to a computer. The audio interface capability makes this a perfect solution for anybody on a budget who’s looking for a combination of a mixer and an audio interface. 4.