Why am I getting an error message on my Brother printer?

Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver.

How do I fix print unable 0B?

“Print Unable 0B” indicates that a hardware malfunction has occurred.

1. Power the machine off by pressing and holding. on the control panel until “Shutting Down” appears on the machine’s display.
2. Wait approximately 10 seconds, then power the machine back on by pressing .

What is the cause for error unable to print 71?

If there is a mechanical malfunction of the brother printer, then the message ‘Print Unable 71′ will appear on the printer’s display unit. To reset the machine, use the power switch and turn off the machine. The Print Unable 71 error message has to do with the laser unit polygon motor.

How do I get rid of the error on my Brother printer?

The easiest way to get rid of the error message is to replace the toner of your Brother printer. If the error “Replace Toner” does not clear from the display after the replacement, try these quick fix solutions: First, make sure that the new toner cartridge is installed properly.

What does Cannot Print 35 mean?

The message “Unable to Print 35” will appear on the display for one of the following reasons: i. A foreign object, such as a paper clip or ripped piece of paper, is stuck in the machine; ii. Mechanical malfunction.

How do I fix Brother printer in error state?

The simple solutions for troubleshooting Brother Printer out of error state includes:

1. Restart the device.
2. Update the printer driver.
3. Make sure that the driver isn’t corrupted.
4. Check for stable source of internet connection, in case of wireless printer.
5. Connect the device properly with USB or wires.

How do I get my printer out of error state?

If your printer’s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn’t open and the paper isn’t jammed.

What does print unable OA mean?

“Print Unable 0A” will appear on your machine’s display if there is a mechanical malfunction of the Brother machine. Unplug the power cord from the back of the machine. …

What does print unable OB mean on Brother printer?

Print Unable 0B means there is a mechanical malfunction of the Brother machine. 1. Press and hold the power button to turn the machine off, wait 5 seconds, and then power the machine on. – If the message Print Unable, Fuser Error, or Self-Diagnostic appears, go to step 4.

What does it mean if an HP machine displays a 13 XX error?

13. XX PAPER JAM [LOCATION] Media is jammed at the specified location (and possibly at other locations). If the message persists after all jams have been cleared, a sensor or sensor lever might be stuck or broken.

Why is there an error printing?

When you invoke your printer, the task calls the printing spool service which then adds your document to the printer queue. Corrupt data in the spool/printing tray might be causing this service to stop. The other most probable reason for the printing error is the connection between your computer and the printer.

How to clear the message’print unable 2A’or’machine error 2A’?

How do I clear the message ‘Print Unable 2A’ or ‘Machine Error 2A’ from the display? The message ‘Print Unable 2A’ or ‘Machine Error 2A’ will appear on the display if there is a mechanical malfunction of the Brother machine. Reset the machine by powering the machine Off using the power switch located on the right side of the machine.

What to do if your printer is unable to print?

Open the ADF cover and check if the paper is jammed in the top of the ADF unit. If a document is jummed in the ADF, pull the document out to the left. Remove any foreign objects and paper scraps from inside the machine. Close the ADF cover. Press STOP/EXIT. If the error message continues, go to STEP 5.

Why do I get error when printing from acctivate?

Sometimes when printing from Acctivate, users will get a generic message saying “error – printing”, “error printing”, “The printer couldn’t print”, or a message similar. In this case, first, verify that you can print to this printer outside of Acctivate by saving the file as a PDF and then try to print.