How do I reset my Radio Shack Pro 97 scanner?

To RESET: – Power the scanner OFF. – Hold down the 2, 9, and PSE keys and power the scanner ON. – CLEAr appears on the display as the scanner resets.

How do I program my Radio Shack scanner?

Press the “Program” button, then “Limit.” “LO” will appear on the screen. Enter the low frequency where you want to begin searching. Press the “WX/E” button and “HI” will appear on the screen. Enter the highest frequency you want to search to and press “WX/E” again.

How do I reset my Radio Shack scanner?

From the owner’s manual, Power on the scanner, and while the “Welcome” screen is showing, press the “zero” key followed by the “one” key.

Is the Radio Shack Pro 164 a digital scanner?

The pro 164 is a analog scanner not digital so please check with your city to see if this can be use there before you buy.

What is trunking on a scanner?

Since a trunking system might send its call and response on different frequencies, a “Trunking” or “Trunk-tracking” scanner is needed. These scanners will let you monitor the control channel frequency as part of the TalkGroup so you can hear both calls and responses and more easily follow conversations.

How do I reset my Radio Shack triple trunking scanner?

1 Answer

1. Turn off the scanner, then turn it on again. Multi-system. Trunking Scanner appears.
2. Press 0 while Multi-system Trunking Scanner appears.
3. Press 1.
4. Press ENT. Initializing please stand by. appears for about 5.

Is the Radio Shack Pro 163 a digital scanner?

5.0 out of 5 stars A great analog scanner with a wide frequency range. It is not digital.

What is the police channel for scanners?

Police scanners allow you to pick up radio frequencies & listen to communication on those frequencies much like an FM radio allows you to listen to different channels by changing the dial from 93.7FM to 102.5FM.

Can cell phones be picked up on scanners?

Member. The simple answer is no. That was when the FCC stepped in and required all cell phone frequencies be blocked in scanners. Local police do not have the ability to listen to cell phone traffic the would be the 3 letter Government agencies.

What do you need to know about the Radio Shack pro-97?

Contents Thank you for purchasing your Pro-97 1,000 channel tripple trunking hand held scanner from RadioShack. Your hand held scanner is one of a new generation of scanners designed to track Motorola® Type I and II (such as Smartnet® and Privacy Plus®) and hybrid analog trunking systems, GE-…

How to install a Radio Shack hand held scanner?

Page 1 Cat 20-527 PRO-97 1,000 Channel Triple Trunking Hand Held Scanner Please read this user’s guide before installing, setting up and using your new product www.radioshack.com… Contents Thank you for purchasing your Pro-97 1,000 channel tripple trunking hand held scanner from RadioShack.

Where to find home repeater on Radio Shack scanner?

The scanner’s LTR Repeater Finder displays the current Home Repeater when monitoring LTR transmissions in manual mode. In the open mode, the scanner stops on the transmission and displays the talk group ID on the bottom line of the display.

What does DCs do on Radio Shack scanner?

The Basics transmissions. In your PRO-97 scanner, the DCS feature can be used to block the reception of transmissions on a shared channel to only those that use the DCS tone that you have specifi ed. DCS mode also features a Code Search setting that allows you to instantly display and store unknown codes into the channel memory.