How do you reset the change oil light on a 2001 Chevy Silverado 1500?

Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the “Change Oil Soon” light flashes, the system is resetting.

How do you reset the oil life on a Chevy Silverado 1500?

Traditional Method For All Models Turn the ignition to “On“. Do not start the engine. Press the accelerator pedal slowly all the way down 3 times within a 5 second interval. Turn the ignition off.

How do you reset the change oil light on a 2000 Chevy Silverado 1500?

Press the accelerator pedal to the floor of the vehicle and release a total of three times within five seconds. Next, turn the ignition to the OFF position and then start the engine. If the light is off, the oil life has been reset to 100%.

How do you reset the ECM on a Chevy truck?

Remove the nut off the negative battery cable with a socket set or wrench. Slide the cable off of the battery and put it aside. Turn the headlight switch to the “on” position to drain the ecm of any remaining power. Wait at least 10 minutes, then turn it back to the “off” position.

How do you reset the oil life on a 2003 Chevy Silverado 2500?

how to reset oil change light on a 2003 silverado 2500hd duramax…

1. Turn the ignition key to the RUN position.
2. Fully push and release the accelerator pedal 3 times within 5 seconds.
3. If the Change Oil Soon light flashes, the system is resetting.
4. Start the vehicle.
5. The oil life will change to 100%.

How do you reset car sensors?

How to Reset a Car Computer

1. Open up the hood.
2. Remove the positive terminal cable from the battery using your pliers or wrench.
3. Go to your fuse box in your car, and look at the diagram.
4. Keep the car disconnected like this for two to three minutes to clear the computer’s memory.
5. Insert the fuse back in to the box.

How do I reset my mileage?

To reset miles with this knob, press and hold down the knob for few seconds; once the fuel economy comes up, your odometer will reset to zero. Reassemble the Odometer: If you are a gear-head about car components and mechanisms like me, resetting the odometer on older vehicles will be an easy and straightforward task.

How to reset a change engine oil light on a 2002 GMC?

Press the gas pedal three times within five seconds. Wait for the oil light on your dash to blink for five seconds and then shut off. The “change engine oil” light has now been reset. “Chevrolet Express, GMC Savana Full-Size Van Repair Manual 1998-2007”; Mike Stubblefield; 2008

How to reset the oil in a Chevy Silverado?

Turn the IGNITION ON, Don’t start the ENGINE of CHEVROLET SILVERADO. IMMEDIATELY PRESS the ACCELERATOR PEDAL 3X, Within 5 Seconds. CHANGE ENGINE OIL will flash. The OIL LIFE RESET will display for 15-20 seconds. ENGINE OIL LIFE: 100% will display. That means the OIL LIFE is RESET. Turn Ignition OFF. Oil Reset is now Complete.

Do you reset the oil life when you change the oil?

When you change the engine oil, be sure to reset the Oil Life System. The Oil Life display must be reset after each oil change. It will notreset itself. Do not reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change.

How do you check the oil life on a Chevy?

Locate and press the VIC button. The VIC button will have an image of a road or the letter “i” on it. Repeatedly pressed the VIC button until “oil life” is displayed on the onscreen menu. 3. Press and hold the check mark button on the VIC for five to ten seconds until the oil life display reads 100%.