What is the standard size for deck boards?
What is the standard size for deck boards?
What Is the Standard Deck Board Size? Common deck board widths are 4”, 6” and 8”. The widths are readily available in most lumber or building supply stores, and the number of pieces easily calculated into deck dimensions. Other widths may be used for aesthetics and effect.
What size wood goes on a deck?
For the deck surface, you can use 2x4s, 2x6s, or 5/4x6s. The 5/4 decking (pronounced “five-quarter”), available in cedar and pressure-treated fir, is 1 inch thick and 5-1/2 inches wide with rounded edges that make for a splinter-free surface.
What is a good size for a deck?
A good size deck starts at 12 feet by 12 feet but can be as small as 8 feet by 8 feet for limited specialty use, such as a sitting area or a barbeque area just outside of the kitchen. Also deck should be no larger than the largest room in the house and not exceed 20% of the house square footage.
Can you use 2×12 for decking?
Deck Joist Spacing How do I keep them even? In general terms, joists spaced 16 inches on center can span 1.5 times in feet their depth in inches. A 2×8 up to 12 feet; 2×10 to 15 feet and 2×12 to 18 feet. The larger the deck, the larger the joists.
How much Wood Would I need to build a deck?
Wood will make up the body of the deck and will be the most plentiful material you will have to purchase. You will need six 4-by-4 or 6-by-6 pieces of lumber for the posts and four 2-by-10 pieces of lumber that are at least 10 feet long. The latter will combine to make up the two large beams to support the deck.
What is the typical size of a deck?
A typical deck has an area of between 600 and 900 square feet. The deck must be big enough that all furniture is at least 30 inches from the edge of the pool, and all walkways must be at least 3 feet wide.
What size wood board is best for building decks?
Joists spaced 16 inches on center will take both 5/4 and 2-inch deck boards (which are actually 1-1/2 inches thick). However, if your joists are spaced 24 inches on center, or if you plan to lay the deck boards on a diagonal, building codes typically require 2-inch material.
What are the dimensions of a wooden deck board?
Widths range from 2 to 12 nominal inches and lengths are available up to 16 feet. Wood decking is typically milled with a radius edge or bull nose. Boards can be installed with stainless steel or galvanized nails or screws appropriate for the wood decking being installed.
https://www.youtube.com/watch?v=yAna5v6LXTg