What kind of chipset is FRITZ Box 7360?

The chipset in the FRITZ!Box 7360 v1 supports vectoring, which means this hardware is capable of providing high speed VDSL.

What kind of modem does FRITZ Box use?

For fast Internet connections a VDSL and ADSL modem is inte- grated into the FRITZ!Box. A preconfigured firewall protects your network from attacks from the Internet.

When does FRITZ Box IP change to 192.168.1?

Use the downloaded firmware: 7. When it’s finished: After OpenWrt ist flashed, the FRITZ!Box- IP will change to 192.168.1.1. You should NOT erase mtd3 and mtd4.

How to enter the bootloader on Fritz Box?

Use FTP in order to enter the bootloader: After the connection was successfully established (see hints above) use as Name: adam2 and Password: adam2 3. Set type: 4. Set passive mode: 5. Set media: 6. Use the downloaded firmware: 7. When it’s finished: After OpenWrt ist flashed, the FRITZ!Box- IP will change to 192.168.1.1.

What do you need to know about the FRITZ Box?

1.1 FRITZ!Box at a Glance Access to the Internet The FRITZ!Box connects multiple computers fast and safely with the Internet. Other network-compatible devices like smartphones and game consoles can use the FRITZ!Box for their Internet connection. For fast Internet connections a VDSL and ADSL modem is inte- grated into the FRITZ!Box.

Where can I get firmware for Fritz Box?

The required firmware can be extracted from the factory FRITZ!Box 7360 v1 image file (as its about the same chipset, it’s also possible to get this firmware file e.g. from the FRITZ!Box 7490 image). Steps for how to get the firmware file with Freetz and use it on OpenWrt:

Can a 3G modem connect to the FRITZ Box?

It is possible to connect a 3G/UMTS USB dongle (modem) with a SIM Card to the FRITZ!Box, in order to use the mobile internet connection through the router via LAN or a wireless access point. Basically there are three steps to set up such a configuration: 1. Installing the necessary packages

Can a FRITZ Box be connected to a computer?

WLAN Base Station for Wireless Connections Computers and other network devices that support WLAN can be connected wirelessly with the FRITZ!Box. If no WLAN de- vice is integrated in your computer, you can install an external WLAN adapter like a FRITZ!WLAN USB Stick by AVM (see also AVM Products for the FRITZ!Box from page 146 ).

Is there a DECT driver for AVM Fritz?

The DECT does not work and is not supported due to missing PIGLET and DECT Driver (AVM driver is closed source). If you need DECT and/ or fully phone support, you should take a look at freetz . Phone works only via SIP with asterisk or another SIP package and a wifi or ethernet SIP phone. ?