What is Mikro-Quat?

Mikro-Quat provides excellent detergent action and suspends and emulsifies grease and difficult soils. It is an effective floor cleaner and leaves no sticky, dulling film. It is also an excellent deodorizer that neutralizes unpleasant odors and destroys odor causing bacteria.

How to Use ecolab Mikro-Quat?

DIRECTIONS FOR USE For disinfection, apply Mikro-Quat to walls, floors, sinks, counter tops, hard nonporous surface furnishings and equipment with cloth, mop or hand spray bottle. Wet surfaces thoroughly and allow to remain wet for at least 10 minutes. Preliminary removal of gross soil is required.

What is Quat sanitiser?

Ecolab Cleanshot Quat Sanitiser is a quaternary based sanitiser for use on previously cleaned non-porous food contact surfaces. Using a quat sanitiser will assist in complying with HACCP regulations. Cleanshot Quat Sanitiser can be used on food preparation areas and all stainless-steel machinery.

How long does Quat Sanitizer last?

QUAT Based Sanitizers: Has a 10-second kill, meaning it must be in contact for 10 seconds in order to the kill the germs, but it is steady and consistent. It is forever stable and doesn’t lose its potency for killing germs over time no matter the frequency it’s being used at.

What is citrus disinfectant?

DESCRIPTION: Citrus Disinfectant is a highly concentrated, lemon scented, germicidal detergent based on a unique blend of quaternary ammonium compounds. Citrus Disinfectant is effective against Staphylococcus Aureus, Salmonella Choleraesnis and Pseudomonas Aeruginosa.

How long does quat sanitizer last?

Is quat sanitizer Food Safe?

Quats may be applied at concentrations varying from about 100 ppm to 400 ppm. For use as a food safe sanitizer, quats should be applied at 200 ppm. Always follow the manufacturer’s label for dilution instructions.

Is quat sanitizer safe?

Quat has excellent wide spectrum germ kill ability, film forming residual, low toxicity and corrosivity, simple to use, good shelf life, works in a variety of pH ranges, highly concentrated, no odor, and safe on mostly all surfaces.

Is quat a sanitizer?

Quats (quaternary ammonium compounds) are potent disinfectant chemicals commonly found in disinfectant wipes, sprays and other household cleaners that are designed to kill germs. It is often the stuff that allows a product to claim to be antibacterial, as they are certified by the EPA as pesticides.

Is quat sanitizer toxic?

Hazard Statements : Harmful if swallowed or in contact with skin. Causes severe skin burns and eye damage. Precautionary Statements : Prevention: Wash skin thoroughly after handling. Do not eat, drink or smoke when using this product.

How do you use Gonzo disinfectant?

Pre-clean heavily soiled surfaces. Apply ready to use product to hard, non-porous surfaces. Allow surface to remain wet for 10 minutes. Wipe surfaces (and let air dry).

Can Gonzo disinfectant be used on fabric?

Excellent Odor Eliminator & Mold Fighter This can not be used on cloth furniture or any surface that is porous.

What makes Mikro Quat a good floor cleaner?

Mikro-Quat Mikro-Quat provides excellent detergent action and suspends and emulsifies grease and difficult soils. It is an effective floor cleaner and leaves no sticky, dulling film. It is also an excellent deodorizer that neutralizes unpleasant odors and destroys odor causing bacteria.

Can you use Mikro Quat in garbage rooms?

Suitable to deodorize the clean in the garbage rooms. It provides excellent detergent action. It suspends and emulsifies grease and difficult soil. It is an effective floor cleaner, leaves no sticky, dulling film. Use Up/Down Arrow keys to increase or decrease volume. Dilute product with water as recommended ratio rates.

When to use Mikro Quat in a hospital?

Use Mikro-Quat in hospitals (suitable for conductive floors), nursing homes, food service facilities, schools and animal research facilities Apply Mikro-Quat to walls, floors, sinks, counter tops, hard nonporous surface furnishings and equipment with cloth, mop or hand spray bottle.

How much Mikro Quat to use to remove soil?

Preliminary removal of gross soil is required. Use 1/3 oz. Mikro-Quat per gal. (235 ppm) of warm or hot water. Allow 1 minute contact time. Use 2/3 oz. Mikro-Quat per gal. of water (470 ppm). Allow 10 minutes contact time.