What is ASTM C1107?

This specification covers packaged dry, hydraulic cement grout (nonshrink) intended for use under applied load where a change in height below initial placement height is to be avoided. The materials used as ingredients in packaged, dry, grout include hydraulic cement, fine aggregate, and other ingredients.

What is the best non-shrink grout?

QUIKRETE® Non-Shrink Precision Grout (No. 1585-00) is a high strength, non-metallic grout designed for precision grouting and general construction applications. Add only water to obtain flowable properties and high strengths. Non-shrink characteristics make it stable and capable of handling high load transfers.

What is non-shrink grout used for?

“Non-shrink” grouts are commonly used for a range of concrete repair applications including patching of honeycombs, tie-bolt holes, accidental damage, break-outs, and pack-filling of gaps and voids. “Non- shrink” grouts are selected because they are seen as good quality, high-strength mortars.

What is Class C grout?

Class C grouts: (also known as Performance Grouts) are shrinkage compensated (non-shrink) during both the plastic and post hardened state.

How long does it take for non-shrink grout to cure?

A damp cure of at least 1 day is necessary to control the non-shrink characteristics and maintain strength levels. When properly mixed to a fluid consistency, FastSet™ Non-Shrink Grout will fully comply with ASTM C1107 and retain a fluid consistency for 20 minutes at 70 degrees F (21 degrees C).

What is Type 2 grout?

Type 2 – A nonshrink grout with strength, height change and flow conforming to ASTM C1107 that is typically used for foundations, ground anchors and soil nails.

What is considered non shrink grout?

Non-shrink grout is a hydraulic cement grout that, when hardened under stipulated test conditions, does not shrink, so its final volume is greater than or equal to the original installed volume. It is often used as a transfer medium between load-bearing members.

How much does non shrink grout cost?

Compare Similar Products

Will non shrink grout crack?

Cement based repair mortars, non-shrink grouts or concretes may form fine plastic shrinkage cracks when exposed to hot weather conditions. Cementitious repair mortars and non-shrink grouts have a minimum and maximum application temperatures as well as material temperature requirements.

How do you use non shrink grout?

QUIKRETE Non-Shrink General Purpose Grout should be mechanically mixed for a minimum of 3 minutes using a 5 gallon (19 L) bucket with a ½ in (13 mm) drill and paddle mixer. For larger applications, a standard mortar mixer may be used. Add only enough water to achieve the flow required for the application.

What is the purpose of grout under base plates?

Concrete grout is used in most column base connections to facilitate the construction process and to ensure that full contact is achieved between the steel plate and the concrete pedestal.

What is high strength grout?

Five Star® High Strength Grout is the industry’s leading cement-based, non-metallic, non-shrink grout for supporting machinery and applications requiring precision alignment. It is formulated with Air Release technology that combines high performance with the greatest reliability.

What do you need to know about 1107 advantage Grout?

PRODUCT DESCRIPTION: 1107 Advantage Grout is a non-shrink, non-corrosive, non-metallic grout. It is formulated as a cement based product with high quality raw materials. 1107 Advantage Grout offers pumpability, heat and thermal shock resistance and provides controlled, net positive expansion. PURPOSE:

Which is the ASTM standard for hydraulic cement grout?

astm c1107 / c1107m – 20 Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink) Active Standard ASTM C1107 / C1107M | Developed by Subcommittee: C09.43

What can a non shrink grout meeting be used for?

As a fluid grout meeting ASTM C1107, it is used for anchoring and grout- ing of anchor bolts, retrofitted reinforcing steel, steel column bases, bearing plates, precast concrete key ways and other installations that require high early and high ultimate strength. Non-shrink characteristics make it stable and capable of handling load transfers.

What’s the minimum psi for a non shrink grout?

Compressive strength, minimum: 10,000 psi at seven days, when tested in accordance with ASTM C579. 4. Initial setting time: Approximately one hour at 70 degrees F. 5. Provide flowable consistency as necessary for the particular application. 6. Epoxy grouts which are volatile and which give off noxious fumes are not acceptable.