What does a GLOCK trigger connector do?

Glock Trigger Connector Purpose The primary purpose of the trigger connector is to regulate resistance in the trigger pull. There are connectors that can increase the weight of the trigger pull, and there are connectors that can decrease the weight of the trigger pull.

Should I oil my trigger assembly?

My opinion about the need to lubricate a trigger is that there is so little movement within the trigger mechanism, lubricant is not needed to prevent wear. That said, a very light application of lubricant can make the action feel more smooth, and I do lube the pivot/contact points on my triggers–but very sparingly.

Should you lubricate GLOCK?

Glocks were designed to not require much lubrication. No lubrication is required on the mag well, firing pin channel, breech face, barrel chamber, and none in the mag itself. All of these should remain clean. It really is that easy.

Why does GLOCK use copper grease?

It is hi-temp copper anti-seize, and it helps with aiding break in within the slide rails & frame.

Where is the lubrication point on a Glock?

The only lubrication point on the receiver is under the ‘hook’ of the connector. This is the most critical point to lubricate for keeping the trigger pull smooth. We recommend a white grease to be applied every few hundred rounds or so to avoid the gritty trigger pull. We at GlockParts.com LLC carry the Mil Comm TW25B Grease for this application.

What happens if you don’t lubricate your Glock?

A failure to properly lubricate the junction of the trigger bar and connector will lead to premature wear and a very heavy trigger pull. That’s bad for shooting accuracy and the gun. The most important drop of oil goes where the trigger bar and connector meet.

How do you put oil in a Glock?

Taking the slide with the breech end up (that’s the end facing you when the dangerous end is facing the bad guy) put a drop of oil in each of the slide rail grooves. Let the oil run down the slide rail grooves. If it does not go all of the way, don’t worry. The oil will be distributed once the slide is mounted on the receiver and cycled.

How often should I apply white grease to my Glock?

We recommend a white grease to be applied every few hundred rounds or so to avoid the gritty trigger pull. We at GlockParts.com LLC carry the Mil Comm TW25B Grease for this application.