Is the HPE ProLiant microserver Gen8 a good server?

HPE ProLiant MicroServer Gen8 is a small, quiet, and stylishly designed server that is ideal for micro and small businesses looki ng to build their first IT server environment.

Can a ProLiant microserver be upgraded to 16GB?

It was a nice touch that our inexpensive review unit came with a single 8GB DDR4 DIMM instead of two 4GB DIMMs. 4GB DIMMs have become less common, and the implication is that one can upgrade this server to 16GB by simply adding an 8GB DIMM. If there were two 4GB DIMMs, they would be discarded in a memory upgrade.

How much does a HP ProLiant microserver cost?

With the introduction of the HPE ProLiant MicroServer Gen10, the company pivoted on a number of fronts. We covered the initial launch for the server some time ago. Our AMD Opteron X3421 powered unit cost us under $375 which is quite reasonable.

Which is the most compact ProLiant microserver in the market?

The HPE ProLiant MicroServer Gen10 Plus delivers an affordable compact yet powerful entry level server that you can customize for on-premises or for hybrid cloud possibilities. It is the most compact ProLiant MicroServer that we have launched so far 1, which can be placed flat or vertically depending on your space.

Which is the default server configuration on HP ProLiant?

To retain the HP recommended default server configuration and install the operating system, press F10 to initiate Intelligent Provisioning. Proceed to the next section. For more information on automatic server configuration, see the HP ROM-Based Setup Utility User Guide in the HP RBSU Information Library.

How many USB connectors does a HP ProLiant have?

For server‑specific information, see the HP ProLiant MicroServer Gen8 User Guide. The I/O connectors are color coded and are marked with icons. The server has seven USB connectors: Four external USB 2.0 connectors, two each on the front and rear panels The system ROM has inherent USB 2.0 support.

How do I perform maintenance on my HP ProLiant?

On the Intelligent Provisioning main screen, click Perform Maintenance. On the Maintenance screen, click HP Smart Storage Administrator (HP SSA). The system launches the HP SSA GUI. On the left-hand side of the screen, select the preferred HP Smart Array Controller device, and then click Configure under the available options.