Popular tips

Is a 302 v8 a good engine?

Is a 302 v8 a good engine?

The Ford 302 small-block is one of the best-known engines in the automotive world. We review its performance and design. Ford’s 302 engine began life in 1968 as a replacement for the smaller 289, thus ushering the Ford small-block into a new era.

How can I get more horsepower out of my Ford 302?

How to Get the Most Horsepower Out of a Ford 302

  1. Install a performance aftermarket cold air intake to replace the Ford 302 factory air intake.
  2. Install a performance aftermarket exhaust system to replace the Ford 302 factory exhaust system.
  3. Install a forced induction — supercharger or turbocharger — kit.

Is Fords 302 a good engine?

Lots of people still prefer the 302 4.9-liter engine to the following single overhead cam 4.6-liter, because the parts are cheaper and the engine is more reliable , despite the fact that there are more parts to fail. The 302 was also made with more nickel in its material, which made it stronger. For all its ancient ways, the 302 was a work horse. Nov 18 2019

What cars come with a Ford 302 engine?

The Ford 302 has been used in quite a few Ford, Lincoln and Mercury models over the year including vans, pickup trucks and of course the popular Mustang. Most people know the 302 more commonly as the 5.0 liter engine mostly due to the fact that 5.0 emblems were placed on Mustangs starting in the early 80s.

What is the difference between a Ford 289 and a 302 engine?

The 302 The 302 differed little from the 289, with the exception of the stroke , which measured 3.0 inches . The bore remained at 4.0 inches. Best known as Ford’s “5.0” engine in the Shelby GTs — although it actually displaced 4.9 liters — the 302 also powered many Ford, Lincoln and Mercury passenger cars.

What is the horsepower of a 302 Ford engine?

With 35 degrees of total ignition lead and 70 jets in the primary metering block, the little 302 produced a jaw-dropping 382 hp at 6,000 rpm and 368 lb-ft of torque at 4,200, a gain of 104 hp and 53 lb-ft solely from the heads and headers.