Is 25 mpg on highway good?

Although it’s tempting to look at a vehicle that gets 50 mpg on the highway and say it’s fuel-efficient, you might not drive that same vehicle. You might think the Accord gets the better fuel economy; however, the 25 mpg combined with a sports car is a solid number.

What is the most fuel-efficient speed to travel at?

55-65mph
The Energy Saving Trust says that the most efficient speed you can travel in a car in terms of achieving the best fuel economy is 55-65mph. Any faster, though, and the fuel efficiency decreases rapidly. For example, driving at 85mph uses 40% more fuel than at 70mph (oh, and it’s illegal too).

How many miles per gallon does a camper van get?

While there are exceptions for each class, on average Class B motorhomes, or Camper Vans, are the most fuel-efficient RVs with an industry average of 18-25 miles per gallon. Class C motorhomes are next with an average of 14-18 mpg, with Class A motorhomes coming in third at 7-13 mpg.

What is the best fuel miles per gallon?

But with all that being said, a good MPG figure to aim for is anything between 50 and 60MPG. This will ensure that your car is efficient and economical, which means low running costs and car tax rates.

Do you use more gas going faster or slower?

The common understanding is that going faster burns more fuel and therefore, the slower you drive, the less fuel your car will use, but this actually isn’t true. Most cars’ peak fuel efficiency occurs somewhere between 50-60 miles per hour.

How many MPG does a Minnie Winnie get?

Phil G. We average 8-10 MPG in our 24 foot Itasca on it’s optional Ford E450 chassis. We cruise at only between 57 MPH and 60 MPH to get this mileage.

How many miles does a 1965 Chevy Bel Air have?

1965 chevrolet bel air matching numbers perfect for stock restoration original windshield bumper jack 3 hub caps the drive train has never been disassembled bought 20 years ago with 82000 miles used as a daily driver now has 183000 miles.

When did Chevrolet start using the name Bel Air?

Initially only the two door hardtops in the Chevrolet model range were designated with the Bel Air name from 1950 to 1952, as distinct from the Styleline and Fleetline models for the remainder of the range.

What kind of engine does a Chevy Bel Air have?

Later in the year, a “Super Power Pack” option added high-compression and a further 15 bhp (11 kW). “Idiot” lights replaced gauges for the generator and oil pressure. This was not the first Chevrolet to be installed with a V8 engine.

What was the oil pressure on a Chevy Bel Air before 1954?

Prior to 1954, the 235 and 216 cubic inch six cylinder engines had babbit bearings and scoops to create oil pressure at the bottom of each rod and the oil pressure was standard at 15-30 PSI. During these years, there were three engine choices, depending on the transmission ordered.