How do you bypass a zone on an alarm system?

Bypass a Zone

1. Enter the following: Your 4-digit code. The number 6 (bypass button) Two-digit zone number of the zone you want to bypass. (01, 02, 03, etc.)
2. Repeat this process for all zones you would like to bypass.
3. Once your system is disarmed, this process will need to be repeated in order to arm your system again.

How do I reset my Honeywell Vista alarm?

Complete the following steps to factory default your Honeywell VISTA P-Series System:

1. Enter programming. Go to your VISTA Keypad.
2. Perform the default. Enter the command [*97].
3. Default the account. Enter the command [*96].
4. Confirm the default. Press [*99] to exit programming.

How do I bypass a zone in Vista 128?

To bypass a zone on a Vista system, first enter in the Master Code (default is 1234). Then press the bypass key [6], followed by the zone number. The zone number will always be 2 digits on Vista-21iP and below panels. On Vista-128BPT and Vista-250BPT panels, the zone number will contain 3 digits.

How do I permanently bypass ADT alarm zone?

To unbypass a zone, enter the two-digit number of the zone(s) to be bypassed (01-34). You can also use the keys to find the zone, and then press to select the zone. The “B” will disappear from the display to show that the zone is no longer bypassed.

How do you bypass zones on Vista 20p?

How to Bypass a Zone on a Honeywell Vista Alarm Panel

1. The System Must be disarmed prior to proceeding.
2. Enter four digit user code (same code to arm and disarm the alarm system), followed by the Bypass (6) key.
3. be bypassed (single digit zone numbers must be preceded by a 0 – example: 02, 03, etc.)

How do I bypass a zone in Vista 128BPT?

How do I default my Honeywell Vista 20P?

1. Access the alarm’s programming mode by entering the installer code, followed by “8,” “0” and “0,” into the control panel.
2. Press the “*” button on the control panel, followed by the “9” and “7” buttons to reset the security system to factory settings.

How do I program Vista 128?

To enter program mode, enter installer code + [8] + [0] + [0] + [0] • To set standard defaults, press *97 • To change to next page of program fields, press *94 • To return to previous set of fields, press *99 • To erase account and phone number field entries, press [*] + field number + [*] • To assign zone descriptors.

What is ADT silent arming?

Silent Arming – By default, when you arm your system, the panel makes exit delay beeps. Silent Arming allows you to arm the system without any noise. No Entry Delay– Once armed, the system will bypass the entry delay that normally occurs when an entry/exit zone is violated.

How to bypass a zone on a Honeywell Vista alarm panel?

Here’s step-by-step instructions on how to bypass zones on your Honeywell Vista Security alarm panel: Enter four digit user code (same code to arm and disarm the alarm system), followed by the Bypass (6) key The Keypad will momentarily display a Bypass message for each bypassed zone.

How to bypass a zone number on Honeywell?

Then press the bypass key [6], followed by the zone number. The zone number will always be 2 digits on Vista-21iP and below panels. On Vista-128BPT and Vista-250BPT panels, the zone number will contain 3 digits. Life safety zones such as Fire and Carbon Monoxide can not be bypassed. Example for bypassing zone 4: enter [User Code] + [6] + [04].

What does keyswitch zone do on Honeywell Vista?

Any zone on the VISTA series can be programmed as a Keyswitch zone type. A keyswitch zone triggers the alarm system to arm or disarm when a momentary contact is made on that zone.

How to bypass a zone in Windows Vista?

To re-arm the Vista system if the zone is still faulted, a user would have to bypass the zone again each time they want to re-arm the system. To bypass a zone on a Vista system, first enter in the Master Code (default is 1234). Then press the bypass key [6], followed by the zone number.