How do I fix my WD external hard drive not showing up on my computer?

Go Disk Management > Find your external hard drive and right click it by choosing Change Drive Letter and Path… Assign the drive with a new letter that doesn’t exist in your PC and mark the Partition as Active. Click OK. Restart PC and your External hard drive will show up and work again.

How do I fix a corrupted WD hard drive?

How to fix a corrupted external hard drive WITHOUT formatting

1. On the desktop, open This PC (My Computer) and select the desired external hard drive. Right-click it and select Properties -> Tools -> Click on Check.
2. Use chkdsk.
3. Use Disk Management.
4. Use diskpart.

How do I unlock my WD external hard drive if I forgot my password?

WD Security Enter an incorrect password five times in a row. Upon the fifth failed attempt, you will be prompted to erase your drive. Agree to the terms, and then click Erase Drive. You can then proceed with a password reset.

Which WD hard drive do I have?

Check for your external drive’s model number on the drive itself. Look on the side and bottom of the device for a sticker with a barcode. This sticker has a number labeled either “MDL” or “P/N.” This is your drive’s model number. There should also be another copy of this sticker on the box the drive was sold in.

Why does my computer not recognize my external hard drive?

If the drive still isn’t working, unplug it and try a different USB port. It’s possible the port in question is failing, or just being finicky with your specific drive. If it’s plugged into a USB 3.0 port, try a USB 2.0 port. If it’s plugged into a USB hub, try plugging it directly into the PC instead.

How do I get Windows 10 to recognize my external hard drive?

Press Windows + X and select Disk Management. In Disk Management, you can see all detected disks are listed. If you see your external hard drive is listed but has no drive letter, you can right-click the drive and select Change Drive Letter and Paths.

Can WD hard disk be repaired?

Options for repairing a Western Digital HDD vary greatly. A reasonable first step is to make a copy of the data, and then perform WD HDD repair. If you have already lost your data, then start recovery as soon as possible with the help of good software (that is reliable and fast).

How do I recover files from a corrupted WD external hard drive?

Procedure to get back data from corrupted WD Passport: First connect corrupted WD Passport to your Windows system though USB. Then, Download and install Yodot Hard Drive Recovery tool on it. After completion of installation, run the application in order to start recovery process.

How do I unlock my WD drive?

▪ Go > Applications > WD Drive Utilities On the Unlock Drive dialog: a. Type your password in the Password box. b. Click Unlock Drive.

How do I bypass a password on an external hard drive?

How to Unlock Hard Drive with Password?

1. Step 1 Search “Control Panel” to “Bitlocker Drive Encryption”.
2. Step 2 Turn on “Bitlocker”.
3. Step 3 Enter the password to finish encryption.
4. Step 1 Press “Win+R” to arouse “Run” interface.
5. Step 3 Choose the locked drive to perform a quick “Format”

How long do WD external hard drives last?

around 3-5 years
The average lifespan for an external hard drive, assuming no physical damage occurs, is around 3-5 years, depending on the make, model and conditions it is stored in. If you’re using an external hard drive to back up your data, you might want to consider replacing it every few years to ensure your data is safe.

Are WD drives good?

Although no hard drive is immune from failure, the WD My Book has proven reliable. We found just 21 reported failures out of 358 Amazon reviews of the 4 TB model, or 6 percent. Backblaze’s 2017 report notes that WD’s 4 TB drives had a low, 2.2 percent annualized failure rate.

How to make a WD external hard drive work?

Update WD external hard drive driver to make it work. 1. Click on Start > Type: devmgmt.msc in Search to open Device Manager by hitting Enter. 2. Expand Universal Serial Bus controllers > Right-click every USB device found there and select Uninstall. 3. Then check out whether any devices show up as unrecognized or not:

How to fix WD external hard drive not responding?

Fix WD external hard drive not working/responding issue 1 Click on Start > Type: devmgmt.msc in Search to open Device Manager by hitting Enter. 2 Expand Universal Serial Bus controllers > Right-click every USB device found there and select Uninstall. 3 Then check out whether any devices show up as unrecognized or not:

Why is my WD hard drive not recognized?

Locate the WD hard drive that going to be initialized and right click it. 2. Choose “Initialize Disk” and pick one partition system between MBR and GPT. 3. Right click the disk and choose “Create New Simple Volume”. Then, you can do as what New Simple Volume Wizard prompts. Initializing WD hard drive will lead to data loss.

Where is the 9 digit code for WD discovery?

In the sign up process I’m asked for a 9 digit code, which is not at the bottom of this drive. So far I’ve read in the forums. … But what now? How do I add it to WD Discovery? Where do I get the old software, if I can’t add it to the new? Should I just throw out the old hard drive and purchase a new (God save the planet)? Please advice, thank you

https://www.youtube.com/watch?v=O04_dXk8PLg