How do I fix code po796?

They include:

1. Replace a faulty electronic pressure control solenoid.
2. Clear blocked transmission fluid passages.
3. Refill low or dirty transmission fluid.
4. Repair or replace faulty electrical components within the circuit.
5. Correct any internal transmission failures.

What is a pressure control solenoid C?

The pressure control solenoid control circuit is an integral part of the automatic transmission. The powertrain control module (PCM) calculates the ideal hydraulic shift pressure (which is used to actuate shifting and torque converter lockup) based on the engine load, engine speed, vehicle speed, and throttle position.

How do I fix code P0746?

What repairs can fix the P0746 code?

1. Replace/repair a defective pump.
2. Adjust the transmission fluid level.
3. Replace contaminated transmission fluid.
4. Replace the faulty line pressure solenoid valve.
5. Fix the electrical connection to the line pressure solenoid valve circuit.

What does p0796 mean on a transmission pan?

Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure and that the transmission will need to be rebuilt or replaced. What does this mean? The cost of diagnosing the P0796 code is 1.0 hour of labor.

When to set the p0796 OBD-II trouble code?

When the P0796 OBD-II trouble code is set, the Powertrain Control Module (PCM) has detected a problem with the Transmission Pressure Control Solenoid “C”. Most automatic transmissions incorporate at least three solenoids that are solenoid A, B and C. The trouble codes related to the “C” solenoid are codes P0795, P0796, P0797, P0798 and P0799.

Is there a problem with the p0796 pressure control solenoid C?

Although generic, the exact repair steps may vary depending on year, make, model and powertrain configuration. When the P0796 OBD-II trouble code is set, the Powertrain Control Module (PCM) has detected a problem with the Transmission Pressure Control Solenoid “C”.

What causes the PCM to store the p0796 code?

In this case, the PCM will store the P0796 code. What causes the P0796 code? A faulty electronic pressure control solenoid is the most likely cause of this code; however, blocked transmission fluid passages, low or dirty transmission fluid, faulty electrical components within the circuit, or internal transmission failures could all be to blame.