How do I fix code P0507?

What repairs can fix the P0507 code?

1. Replacing or cleaning the idle air valve.
2. Repairing the intake air leak.
3. Repairing the charging system.
4. Cleaning the throttle body.
5. Replacing the power steering pressure switch.

Is a P0507 code bad?

The issues that trigger a P0507 code are usually not severe enough to prevent you from driving your car, but it can cause some difficulties.

How do you fix the idle air control system RPM higher than expected?

Check the PCV valve as well and see if it is blocked and needs a new replacement. Inspect the IAC (Idle Air Controller) if it is equipped, and verify its performance. Try swapping in a new throttle body (if available) and see if it can fix the problem.

Why is My Audi idling high?

A faulty or blown fuse in other electronically controlled systems can cause the Idle Air Control (IAC) motor to malfunction, leading to a higher than normal engine idle speed. Malfunctioning Throttle: A malfunctioning throttle system can cause both a high or low idle as well as an engine stall.

What does engine code P0507 mean?

What Does P0507 Mean? The P0507 code is triggered when the Engine Control Module (ECM) detects that the engine is idling higher than the specified idle rpm range. The standard engine idle is usually between 600-800rpm based on the model of the vehicle.

Can you drive with a P0507 code?

What Is the Severity of Code P0507? – Low. This trouble code will not prevent your vehicle from driving, but you may experience engine stalling, high idle rpm, harsh engagement of transmission, difficulty starting, and/or surging idle.

How much does it cost to fix a idle control valve?

Idle control valve replacement cost ranges from $120 to $500. The price can jump significantly and reach $700 depending on your vehicle’s automaker. Unfortunately, the part itself is not cheap, and therefore, you can’t save a lot on labor costs by doing the job yourself.

What does service code p0507 mean on Audi A4?

It is a generic code, which means that it has the same for the Audi A4 as any other vehicle. Unlike many OBDII trouble codes, P0507 will typically be noticeable to you when driving. Here are the typical symptoms for the A4: Service Engine Soon Light – The reason why you are here.

What does idle air control code p0507 mean?

P0507 is a fairly typical OBDII trouble code. It is typically triggered when the engine idle speed is 200 rpm or more over the predetermined limit set by the manufacturer. It is a generic code, which means that it has the same for the Audi A4 as any other vehicle.

What is the fault code for an Audi A4?

The following fault codes were stored: P0507 Idle Air Control System RPM Higher Than Expected P0304 Misfire Cylinder 4. Before giving Autologic a call for help, the vehicle was in fact running lean, confirmed by fuel trim. The shop determined the crankcase breather was faulty, and once replaced they disassembled it and the diaphragm was ruptured.

What causes front main seal failure on Audi A4?

When crankcase breather valves rupture, the crankcase will be put in high vacuum condition, which can lead to engine seal failure. Audi / VW did release a TSB for front main (crankshaft) seal failure due to high crankcase vacuum.