How do I factory reset my HP ProCurve?

To execute the factory default reset on the switch, perform these steps:

1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch.
2. Continue to press the Clear button while releasing the Reset button.
3. When the Self Test LED begins to blink, release the Clear button.

How do I reset my HP ProCurve 2510 to factory settings?

How to reset a ProCurve 2510-24g to default settings

1. Press in both the Clear and Reset buttons (tiny buttons on the left edge)
2. Release the Reset button after the port lights come on (~2 seconds)
3. When the Self-Test LED starts flashing (to the left of the Clear and Reset buttons), release the Clear button.

How do I factory reset my HP ProCurve 1800 24g?

How do I reset factory defaults on the ProCurve 1800 Series Switches?

1. Remove the power cord from the back of the switch.
2. Connect port 1 to port 2 on the front panel, using a standard network cable.
3. Reconnect the power cord to the rear of the switch.
4. Wait at least 40 seconds before disconnecting port 1 from port 2.

How do I factory reset my HP ProCurve 2626?

Factory Reset When enabled, the switch can be reset to factory defaults by depressing the “Clear” and “Reset” buttons together, releasing the “Reset” button while holding the “Clear” button down, and releasing the “Clear” button as soon as the “Test” light begins to flash rapidly.

What are the features of the HP ProCurve switch 2124?

The HP ProCurve Switch 2124 is an unmanaged 24-port switch with 10/100 auto-sensing per port and one open transceiver slot for a 100Base-FX uplink. The ProCurve Switch 2124 offers ProCurve Auto-MDIX on all 10/100 ports. Features and Benefits Industry-leading warranty* Connectivity 24 auto-sensing 10/100 ports: provide high-performance switching

Where is the reset button on the HP ProCurve switch?

Locate the reset/clear button on the Procurve switch, while the switch is still plugged in and running. The button is beneath a hole about the size of a paperclip, which is labelled.

How to reset HP ProCurve 1700 to default settings?

Once you see the lights stop blinking you will know that it has fully recycled. Power the switch back off, unplug the ethernet cable and then power the switch back on. The switch should now be fully reset and back to the factory default settings and IP of: 192.168.2.10.

What to do if you lost your HP ProCurve password?

If you have lost the password for an HP Procurve switch, you can reset the password as long as you have physical access to the device. Each switch has a “clear” or “reset/clear” button, depending on the model, that resets the device to its factory settings.