How do I connect my Canon mg3500 printer to Wi-Fi?

Hold down the Wi-Fi button (A) on the printer until the (orange) Alarm lamp (B) flashes once, then release the Wi-Fi button after the flash. Make sure that the (blue) Wi-Fi lamp (C) flashes quickly and the (green) POWER lamp is lit, then press and hold the button on the access point within 2 minutes.

How do I connect my Canon Pixma printer to Wi-Fi?

Connecting Device to Printer

1. Turn on wireless communication on your computer or smartphone. For Android or iOS, enable “Wi-Fi” on your device’s “Setting” menu.
2. Select “XXXXXX-iP110series” (“XXXXXX” represents last six digits of printer’s MAC address.) from SSID list displayed on device.
3. Enter password.

Why is my Canon Pixma printer not connecting to Wi-Fi?

The Canon printer not connecting to Wi-Fi issues can occur due to several reasons. To fix the problem, try to update the printer driver. If the issue persists, check for network issues, or as a last resort, try to uninstall and reinstall the printer and drivers.

What is WPS button on Pixma printer?

PIXMA MX534 Wi-Fi Setup Guide. Some access points (often called routers or hubs) feature an automatic connection button labelled “WPS” which stands for Wi-Fi Protected Setup and allows permitted devices to connect to your network without needing to enter a password.

What is WPS button?

Wi-Fi Protected Setup (WPS) is a feature supplied with many routers. It is designed to make the process of connecting to a secure wireless network from a computer or other device easier. IMPORTANT for Android TV™ models.

Why won’t my Canon mg3620 connect to WiFi?

The most common reported printer issue is that most users cannot connect their printer to the WiFi. Reset your Network settings by going to: Start button >> Settings >> Network & Internet >> Status >> Network reset then click Reset now button.

Why won’t my printer connect to the WiFi?

Make sure the printer is on or that it has power. Connect your printer to your computer or other device. Check the printer’s toner and paper, plus the printer queue. In this case, reconnect your device to the network, reconfigure security settings to include printers, and/or install updated drivers.

How do I set up my Pixma mg3550 wireless connection?

When referring to the printout, check that the “Connection” indicates “Active” and that the SSID – Service Set Identifier (the name of your wireless network) indicates the correct name of your wireless network. This concludes the WPS setup procedure. Please now proceed by installing the software to make the most out of your PIXMA MG3550.

What does WPS stand for on Pixma mg3550?

PIXMA MG3550 Wi-Fi Setup Guide. Some access points (often called routers or hubs) feature an automatic connection button labelled “WPS” which stands for Wi-Fi Protected Setup and allows permitted devices to connect to your network without needing to enter a password.

How do I connect my Canon printer to my WiFi?

Download the Canon Print Inkjet / Selphy app, then put the printer into cableless setup mode. Now, connect your mobile device’s wifi to the printer’s wifi setup signal. Open the app and follow the instructions for connecting the detected printer to the network.

How do I connect my Pixma printer to the Internet?

Before attempting to connect your PIXMA printer to your wireless network, please check that you meet the following two conditions: Ensure that you have an access point (sometimes referred to as a router or hub) via which you get an Internet connection. Your access point must be fully functioning before you go to the next step.

https://www.youtube.com/watch?v=0Nw3LVHOCcY