Does the Behringer Xenyx 502 mixer have phantom power?

The ultra-compact XENYX 502 mixer’s 5 Inputs (1 mic, 2 stereo) allow you to effortlessly achieve premium-quality sound, thanks to the studio-grade, phantom-powered XENYX Mic Preamp and ultra-musical “British” channel EQ.

Do mixers provide phantom power?

As a side note, mixers will provide phantom power at 48 volts but the ANSI standard (IEC 61938) allows for 12, 24, and 48 volts which other equipment might provide, such as with an acoustic guitar preamp. Also, be aware of Bias power, also known as plug-in power.

Does Behringer xenyx 1202FX have phantom power?

The 12-input, 2-bus XENYX 1202FX has 4 XENYX mic preamps with +48 V phantom power, making it possible to use 4 dynamic or condenser microphones.

When should I use phantom power mixer?

Phantom power is used with condenser microphones. It is called phantom power because there is no obvious external power supply for the condenser mic; the power supply is invisible and therefore a “phantom.” The mixer sends voltage up the same wires that the audio is traveling down.

Do Behringer mixers have preamps?

Professional sound quality, our legendary XENYX mic preamps, British-style EQs and rugged reliability make XENYX 802 ideal for both your live gigs and recording.

Is FX send mono or stereo?

The bus appears at the console’s FX send output and can be fed from there to an external effects device. The return from the effects unit is then brought back into the console on the stereo channels. Each FX send is mono and features up to +15 dB gain.

Are Behringer xenyx good?

This Behringer Xenyx 802 is the perfect unit for any musical performance situation (I’ve used it both for live playing and in the studio) requiring quality audio in a “stripped-down” setting. It is compact, quiet, practical (nothing here that is unnecessary) and has very good interface feel.

What makes a Behringer xenyx mixer so good?

All XENYX mixers have one thing in common – great-sounding, high headroom XENYX mic preamps. These state-of-the-art mic pres represent a major step in the evolution of audio technology – and they can easily hold their own, even when compared to the most expensive stand-alone mic preamps.

How big is the Behringer xenyx 302usb audio mixer?

At approximately 4″ long and 5″ wide (117 x 135 mm), the Xenyx 302USB features one of our state-of-the-art, phantom powered Xenyx Mic Preamps, an XLR & 1/4″ combination input and a stereo USB/Line channel – plus a dedicated 2-Track input.

What’s the dynamic range of a xenyx mixer?

XENYX preamps off er a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to well above 200 kHz. Armed with these outstanding mic preamps, XENYX mixers provide such transparent, crystal-clear performance you just might think someone upgraded your mics while you weren’t looking.

How does the Behringer xenyx q502usb connect to the computer?

That’s where the XENYX Q502USB comes in. Thanks to the built-in, bi-directional stereo USB audio interface, you can connect your Q502USB directly to your PC or Mac computer via a single USB cable. Now any signal source you connect to the mixer can be recorded directly to your hard drive. Which brings us to software. Free Software Would Be Nice!