Popular tips

Do you need a crossover cable to connect two routers?

Do you need a crossover cable to connect two routers?

A straight-through cable is used in local area networks to connect different devices like a computer to a network hub such as a router, router and switch, PC and switch, and so on. A crossover cable is only required when interconnecting two devices with the same functionality.

Can I have 2 routers connected with Ethernet cable?

Home wireless routers can be connected using Ethernet cable in the same way as wired routers are connected. Connecting two home routers over wireless is also possible, but in most configurations, the second router can only function as a wireless access point instead of a router.

Do I need a crossover cable to connect two routers?

A crossover cable is only required when interconnecting two devices with the same functionality. what cable is used to connect two routers? Plug one end of the Ethernet cable into any LAN port of the primary router, then plug the other end of the cable into the LAN port on the back of the second router.

How to connect two LANs to a router?

1: Connect through Ethernet ports: use a crossover cable to directly connect the routers together through two Ethernet ports. 2: Connect through serial ports: use a DCE/DTE cable to connect the serial ports. 3: Connect through auxiliary user interface (AUI) ports: connect two routers through AUX (AUI speed up to 115.2 k bps).

How to connect two routers back to back?

There are many ways to connect two routers back-to-back. 1: Connect through Ethernet ports: use a crossover cable to directly connect the routers together through two Ethernet ports. 2: Connect through serial ports: use a DCE/DTE cable to connect the serial ports.

What kind of cable do I need to connect my router to my computer?

Unless the ports are auto-sensing, the receive pins must match up with the transmit pins and this will require a crossover cable. The rule of thumb is: when connecting similar devices (router to router, computer to computer) use a crossover cable.

https://www.youtube.com/watch?v=5vDdk2Tcc0Q