Why is my HP printer not printing after changing cartridges?

Running an extended cleaning cycle may correct the problem and help the printer recognize the cartridge. Check your printer for a “Cleaning” button and press it or hold it down for a few seconds. After running the cleaning cycle, print a test page to determine whether the printer can print again.

How do I change the ink cartridge on my HP Photosmart 2710?

Replace any low or empty ink cartridges.

1. Turn on the printer.
2. Open the ink cartridge access door.
3. Wait until the printer is idle and silent before you continue.
4. Lightly press down on the ink cartridge to release it, and then pull the ink cartridge out of its slot.

How do I clean the printhead on my HP Photosmart 6520?

Touch Settings , touch Tools, and then touch Clean Printhead. If print quality is unacceptable on the page that prints, touch Clean Again to perform a second cleaning, and then continue to the next step. If there are defects in the alignment patterns, align the printhead.

What ink does HP Photosmart use?

HP 564 ink
The PhotoSmart 7520 uses the HP 564 ink cartridge series. The HP 564 series comes in black, photo black, cyan, magenta, and yellow. All HP 564 cartridges come in two yields: standard yield HP 564 (CMYK) cartridges print 250 pages and higher yield HP 564XL (CMYK) cartridges print 550 pages.

Can you print if one cartridge is empty?

When one of the ink cartridges runs out, many times the printer will not print until the cartridge has been replaced. You can print with only one ink cartridge by changing the printer “Property” options before printing.

Why won’t my printer print after I changed the ink?

Verify the ink cartridge(s) has been inserted properly. If a lever has been changed from its original position to allow the installation of ink cartridges, ensure it has been returned to its original position. Perform a head cleaning on printer if available. Try resetting the ink cartridge counter.

How do I reset my HP printer after refilling ink?

(1) Turn the printer on, if it is not already on. (2) Wait until the printer is idle and silent before you continue. (3) With the printer turned on, disconnect the power cord from the rear of the printer. (4) Unplug the power cord from the wall outlet.

Is the HP DeskJet 6520 black ink not printing?

HP Deskjet, Photosmart 6520 Printers – Black Ink Not Printing, Other Print Quality Issues This document is for HP Deskjet Ink Advantage 6525 and HP Photosmart 6520, 6521, and 6525 e-All-in-One printers. The quality of a printed document or photo is not as expected.

How to replace ink cartridges on HP DeskJet?

If any ink cartridges are critically low or empty, replace them with new genuine HP ink cartridges. Go to HP Deskjet, Photosmart 6520 Printers – Replacing Ink Cartridges for steps and more information. If all ink cartridges have sufficient ink but the issue persists, continue to the next step.

How can I get black ink out of my HP printer?

Open the ink cartridge access door. Press the tab on the front of the ink cartridge to release it, and then pull it out of the slot. Examine the vent area on the top of the ink cartridge. If the vent is clogged, use a pin to gently remove excess adhesive from the vent.

How to check print quality on HP DeskJet?

Use a Print Quality Diagnostic report to check if the printhead needs to be cleaned or if there is an ink cartridge alignment issue. Load plain white paper in the tray. On the printer, touch Settings, touch Tools, and then touch Print Quality Report.