What vehicles have 6L80 transmission?

The 6L80E transmission is widely used in such popular GM applications as the Silverado and Sierra trucks, Tahoe, Suburban, Denali, Hummer H2, Cadillac Escalade, STS and CTS, Camaro, and G8 .

Is the 6L80E a good transmission?

The 6L80 is doubtless a very successful OEM transmission, and a terrific conversion transmission in the right Jeeps and situations. However, it is a long transmission and is not compatible with short-wheelbase Jeeps such as the CJ5.

How strong is a 6L80 transmission?

How strong is a 6L80 transmission? If you were wondering how much HP can a 6L80 handle? This transmission is designed to handle as much as 440 lb-ft of engine torque and 664 lb-ft of output torque.

What is difference between 6L80 and 6L80E transmission?

The gearing spread is a very capable 6.04, with ratios in each gear as follows: compared to your stock JK auto transmission you can see a 6L80e has a much better 1st and second gear along with 2 overdrives. The 6L80 has a maximum RPM limit of 6500 RPM. The 6L90 case is about 1.4″ (35mm) longer than the 6L80 case.

How much horsepower can a 6L80 transmission handle?

They feature custom nitrided steels to prevent warping, and more durable clutch linings that are more resistant to heat. With these modifications, a 6L80E can handle 500 to 600 rear-wheel horsepower in the typical street/strip application, although we have had customers push them all to the way to 1,000 hp.”

How much HP can a stock 6L90 handle?

The 6L90 transmission is not a terrible transmission. In fact, it is a high-performance component capable of handling up to 700 horsepower.

How much HP can a 4l80 handle?

How much power can the 4L80E handle? A totally stock unit or rebuild will typically live well with up to 450 flywheel HP/TQ.

How much HP can a 4L80 handle?

How much torque can a stock 6L80E handle?

New SuperMatic 6L80E Six Speed Transmission Can Handle 650 LB-FT.

How much horsepower can a 6L80E handle?

How much HP can a 6L80E handle?

Which transmission is better 4L60E or 4L80E?

Without a doubt the 4L80E is the more powerful of the two transmissions. Vehicles with powerful engines, such as big trucks for towing or high speed cars for racing, require a 4L80E rather than a 4L60E as the power of the engine is likely to break smaller, less powerful transmissions.

Is a 4L60E interchangeable with a 4L80E?

FYI – 4L60E & 4L80E transmissions are NOT directly interchangeable. The wiring pinout of the trans plug is different, and 2 VSS’s are used versus 1 on the 4L60E. Besides the wiring difference, the ECM also requires a segment swap as that portion of the transmission control is completely different.

How many quarts of fluid to fill 4L60E at service?

The 4L60e’s fluid volume is 12 quarts (dry) of transmission fluid. This volume is based on a stock, with a 12 “torque converter,” shallow “transmission pan.” The ability of additional fluid will range from an extra quart or more with a deep pan.

How many solenoids are the 4L60E?

There are 2 shift solenoids in a 4l60e (1-2 and 2-3), and both control up and downshifts with fluid passing through them when commanded to do so by the computer. However, when they go bad, you will notice very quickly. Your transmission will display a variety of symptoms, but sometimes these issues can be confused by other common 4l60e issues.

What does the E stand for in 4L60E?

4L60E Identification. The 4L60E transmission has been in production for over twenty years, even longer if you consider the fact that it came from the 4L60 (700R4). The 4L60 got the E at the end whenever control of the transmission was switched to the engine computer. The E stands for “electronic” or electronic shift.