What size drill do you use for a 3/8 16 tap?
What size drill do you use for a 3/8 16 tap?
To Tap This Size Screw Or Bolt: | Use This Drill Bit: | Decimal Inches |
---|---|---|
8mm-1.00mm | 7.1mm | .2795 |
5/16-32 NEF | 9/32″ | .2812 |
9mm-1.25mm | 7.9mm | .3110 |
3/8-16 NC | 5/16″ | .3125 |
How many MM is a 1/8 drill bit?
Drill Bit Hole Diameters | ||
---|---|---|
Metric Size | Fractional Size | |
.7 mm | .0276 | 7/64 |
.8 mm | .0315 | 1/8 |
.9 mm | .0354 | 9/64 |
What size drill bit for 3/8 pipe tap?
Most drill charts recommend a 5/16 drill for a 3/8-16 bolt. Cutting holes that are smaller will leave more material for the tap to cut out, risking tap breakage. Drilling larger holes will result in weaker threads, increasing the possibility of stripping them.
What size hole for tap?
Standard taps and spouts generally require a hole of at least 22mm in diameter. Sensor taps usually specify a 28mm diameter hole, although 25mm may be sufficient. Monobloc mixer taps, taking both a hot and cold supply, mostly require a minimum 32mm diameter hole.
What are drill sizes?
Drill Bit Lengths Jobber-length drill bits are the most common, with a length somewhere between 9 to 14 times the diameter. Screw-machine-length drills arethe shortest available standard sized bits. Aircraft-length drills are extended length drill bits that are manufactured in fixed length such as 4, 6, 8, 12, 18, 24-inch bits, rather than proportional lengths.
What is Tap pipe?
A pipe tap is generally made out of hardened steel or some form of steel alloy that makes it harder than most metals that common pipes are made out of. This is because as the pipe tap is inserted into the pipe end, it has to be turned and pressure must be applied to the tap or it won’t properly cut the pipe thread.