What oil does a Kawasaki KLX 110 take?

10W-40 oil
NOTE: The Kawasaki KLX 110 takes 1.1 quarts of 10W-40 oil.

How much oil does a KLX 110L take?

I just checked my manual, which is for the 110 and 110L, and the capacity says: 1.1L (1.2 US qt).

What spark plug does a KLX 110 take?

Iridium IX Spark Plug CR6HIX NGK 7274 10mm x 1.0 Thread Size, 1/2″ Reach (Fits: Kawasaki KLX110)

What is 10w40 oil used for?

Using the correct viscosity oil eases starting, reduces friction, and slows wear. For even more effective start-up protection, use a synthetic 10W-40 instead of a conventional 20W-50. The synthetic 10W-40 flows easily and still maintains enough viscosity to protect piston skirts and bearings when it gets hot.

What does a KN 112 oil filter fit?

K&N Motorcycle Oil Filter: High Performance, Premium, Designed to be used with Synthetic or Conventional Oils: Fits Select Honda, Kawasaki Motorcycle Models, KN-112.

What kind of spark plug does a KLX 110 take?

How much oil does a KLX 125 take?

BBR Jetting Chart

When should you use 10w40 oil?

10w40 is better suited for hot weather or heavy loads. When you expect your vehicle’s operating temperature to be higher than most casual driving cars, using 10w40 is recommended. The higher viscosity of 10w40 at high temperatures reduces wear and tear when putting more pressure on your vehicle’s engine.

What kind of oil does a Kawasaki KLX 110 take?

PRO TIP: Hand-tighten all the bolts before using the socket to make it easier to line up all four holes. Step 14. Pour in 1 quart of 10W-40 oil, then replace the cap and run the engine for a minute or two to circulate the fresh oil. NOTE: The Kawasaki KLX 110 takes 1.1 quarts of 10W-40 oil.

What kind of oil does a Kawasaki Z1000 use?

Whether you’re running a 200bhp Ninja ZX-10R on track, commuting on an ER-6F, or bashing out the miles on a Z1000, the right engine oil makes all the difference. Our selector below helps you find the right grade engine oil and where possible we’ve listed Kawasaki’s recommended minimum and maximum levels.

Why do I need to change the oil on my Kawasaki motorcycle?

Changing the oil on your Kawasaki motorcycle keeps the engine clean and running smoothly, and helps protect moving parts inside the engine. If playback doesn’t begin shortly, try restarting your device.

How do you change drain plug on Kawasaki KLX 110?

Replace the drain plug, making sure that the crush washer is still on the plug. Thread it by hand, then use a torque wrench to tighten it to 21 foot-pounds. Step 13. Replace the skid plate by tightening the two 12mm bolts at the back of the plate, and the two 8mm bolts on the front.