What is code 10 on Thermo King?
What is code 10 on Thermo King?
Thermo King Alarm Code 10: High Discharge Pressure.
What is code 66 on Thermo King?
66 LOW ENGINE OIL LEVEL. 67 CHECK LIQUID LINE SOLENOID CIRCUIT. 68 INTERNAL CONTROLLER FAULT CODE. 69 CHECK REMAGNETIZATION CIRCUIT.
What is code 25 on Thermo King?
Thermo King Alarm Codes
| # | Color | Operator Action |
|---|---|---|
| 25 | check | If unit/zone is shut down repair immediately. Otherwise, report alarm at end of day. |
| 26 | check | Manually monitor temperature. Report alarm at end of day. |
| 27 | take action | Unit cannot operate and is shut down. Repair immediately. |
| 28 | ok | Report alarm at end of day. |
What is code 37 on a Thermo King?
Code 37. Code 37 has a green status, which indicates that it is OK to run your Thermo King. When you encounter Code 37, start by checking the engine coolant level. Residues stuck inside the reservoir cause inaccurate engine coolant level readings.
What is code 17 on a Thermo King?
Code 17 means Engine Failed to Crank when start is requested by the Microprocessor. Check Starter (unfortunately lately new thermoking starters often fail for some reason). Fuel pull in Solenoid failed or its circuit.
Where is the reset button on Thermo King APU?
The newer Evolution model does not have that button, resets are done by turning the unit off and on at the control panel. The unit will not start if the switch on the actual TriPac engine is in the off position, which you will have to open the panel like you are checking the oil to see.
What does ALt mean on a Thermo King APU?
ALt: This code indicates that a charging system failure has occurred. This code will occur if there is no alternator output after 2 minutes of operation. To clear Alarm Codes, use the HMI Main Power Key to turn off the TriPac system.
What are the alarm codes for the Thermo King?
Thermo King Alarm Codes Defined: 1 NO ALARMS EXIST 2 MICROPROCESSOR POWER UP RESET 3 CHECK EVAPORATOR COIL SENSOR 4 CHECK RETURN AIR SENSOR 5 CHECK DISCHARGE AIR SENSOR 6 CHECK AMIBENT TEMP SENSOR 7 CHECK COOLANT TEMP SENSOR 8 CHECK ENGINE RPM SENSOR 9 UNIT RUNNING IN COIL SENSOR 10 HIGH EVAPORATOR TEMPERATURE
What does code 84 on the Thermo King mean?
Code 84 Code 84 has a green status, which indicates you can report the alarm at the end of the day. This error code usually happens as a result of other alarms in your Thermo King. It is a temporary condition and should go away by itself.
What do you need to know about Thermo King?
Road Learn more about Thermo King refrigeration systems, heaters, HVAC systems and auxiliary power units (APUs) for trailers, trucks, vans, buses, and shuttles. Explore Thermo King’s line of refrigeration systems and heaters for cargo rail applications and HVAC systems for passenger rail.
When to report high discharge pressure on Thermo King truck?
09* High Evaporator Temperature If the unit shuts down on this alarm code repair immediately. Otherwise, report this alarm at the end of the day. 10* High Discharge Pressure (or Temperature) If the unit shuts down on this alarm code repair immediately. Otherwise, report this alarm at the end of the day.