What is an auxiliary transmission oil cooler?

An auxiliary cooler will keep your transmission running right where it needs to be, ensuring you don’t overheat your transmission. Driving Conditions – If you live somewhere that gets excessively hot or is fairly hilly or mountainous, an auxiliary transmission cooler is a good option for you.

How does an auxiliary transmission cooler work?

How Does a Transmission Cooler Work? Fluid heated by the transmission, engine, or power steering pump flows to the cooler. Air flowing over the fins of the cooler carries away heat and cools the fluid flowing within the fins. The cooled fluid is routed back through the transmission via the return line.

Do auxiliary coolers cool automatic transmission fluid?

Answer: We recommend installing the auxiliary cooler after the radiator to return the coolest fluid directly to the transmission. Installing the cooler before the radiator will still provide additional cooling and may be necessary in some difficult-to-access applications.

Is a transmission cooler necessary?

Transmission coolers help to protect your transmission when you turn up the heat. For the same reason, the addition of an auxiliary transmission fluid cooler isn’t just necessary for those who tow trailers anymore. …

How much does it cost to install a transmission oil cooler?

You can have a local transmission shop install a transmission oil cooler in your vehicle. Expect to pay between $150 and $250 for the job. Either way, installing an auxiliary transmission oil cooler is one of the best investments you can make in protecting your transmission from overheating and certain failure.

Can I run two transmission coolers together?

We Keep Our Transmission Chilled With Not One, But Two Derale Coolers. There’s a direct link between a transmission’s temperature and its lifespan: a transmission that gets too hot will absolutely fail more quickly than one that stays within a normal operating temp.

Where is the transmission oil cooler located?

The transmission cooler is inside the radiator; a leak will result in transmission fluid swirling around in the radiator’s neck. It also results in pink, milky transmission fluid.

Can you run two transmission coolers together?

Not many pros. In series is fine. One in front of the other will be a not be much more effective than just one. One reason is the air that goes thru the front cooler gets heated up and is less effective as it goes thru the rear.

Where is transmission oil cooler located?

The oil cooler is designed to lower the temperature of the transmission fluid to make it easier for the internal parts of the transmission to use. There are two types of transmission coolers, the type found inside the radiator or the kind that is external to the radiator that usually sits in front of the AC condenser.

Does The BT50 have a transmission cooler?

Mazda BT50 Transmission Cooler (Vehicle Build BEFORE Aug 2020) Our Mazda BT50 Transmission Cooler allows your transmission to maintain normal operating temperatures even while towing or going offroad and it is both durable and reliable as 4WD’ing in this country demands.

How big of a transmission cooler do I need?

Transmission coolers are rated by their gross vehicle weight or GVW, and this can go from as little as 10,000, all the way up to 40,000 or more! Based on the transmission cooler GVW chart shown below, the optimal transmission cooler should be at least 20,000 depending on the tow capacity.

Why do you need an auxiliary transmission cooler?

Towing increases the load and puts additional strain on a vehicle’s transmission, thereby increasing the heat that is generated and the cooling levels required to ensure the transmission doesn’t burn out. An auxiliary transmission cooler will not increase the towing or hauling capacity of a vehicle.

Where can I get a transmission cooler installed?

If you think a transmission cooler is the way to go, AAMCO Colorado can help. With our multi-point transmission diagnostics, an AAMCO technician will identify any possible issues that need to be addressed and what can be done to remedy any overheating issues – including installation of an auxiliary transmission cooler.

How does the coolant work in a transmission cooler?

Fluid heated by the transmission, engine, or power steering pump flows to the cooler. Air flowing over the fins of the cooler carries away heat and cools the fluid flowing within the fins. The cooled fluid is routed back through the transmissionvia the return line.

Can a transmission cooler increase the towing capacity?

An auxiliary transmission cooler will not increase the towing or hauling capacity of a vehicle. If you overload the vehicle, no amount of cooling will make it haul or tow more than the maximum specified weight.