What does A and B mean on smart meter?

If your meter has an ‘A’ and ‘B’ button, press ‘A’ until you get to TOTAL ACT IMPORT. The number below this is your electricity reading. Your meter might have three buttons to the side of the display. If this is the case, just press the middle button, and the display will show your reading below the ‘IMP’ on screen.

How do I reset my smart meter?

To reset it it turn it right off by holding down the power button for 10 seconds and then power it back on again, it should work.

What does code 001 on SCE meter mean?

Screen Flash – CODE 001 One of two codes that provide the specifics of the home’s electrical consumption. This code displays the cumulative kilowatt-hours that your home has drawn from the utility grid. Essentially, how much power the electronics in your house have been utilizing and what you have been paying Southern California Edison for.

How do you write down a number on a smart meter?

When a dial hand appears to be exactly on a number (see dial “D” in each example) look at the dial directly to the right. If the hand on the dial to the right has not passed “0”, write down the lower number. For example, since the hand on dial “C” has not passed “0”, dial “D” is “2”.

How does the gas meter work on a smart meter?

Your gas meter records and sends gas usage data through a smart “module” located behind the dials. The smart module moves the dials as gas is used. You can read from left-to-right or right-to-left. When the dial points between two numbers, write down the lower of the two numbers.

What does it mean when smart meter says no problem?

The smart meter is alerting that it’s currently connected via communication to the utility’s monitoring. This is a standard display error check. The meter is letting the observer know that there is currently no issues with the display.