What do I do if my boiler says E119?

As we can see here, the fault code on the front of the boiler is flashing E119 and E119 on Baxi means low water pressure, so you’d just have a look at your gauge there and you would see that it’s below into the red, which means that the pressure needs to be topped up.

What does error code E119 mean on a Baxi boiler?

low water pressure
Error code E119 is low water pressure, check the dial on the boiler and top the pressure up using the filling loop. The pressure should read between 1.0-1.5 bar when cold.

Why is my boiler saying E119?

Code E119. If the code E119 is displayed (‘E1′ followed by ’19’), this means the pressure in the boiler has dropped and a water leak could be stopping the system working properly.

Do you turn boiler off Repressurise?

It’s important to switch your boiler off before re-pressurising it. If possible, let it cool down for 4 to 6 hours.

Can you Repressurise a boiler when it’s on?

The most effective way to fix a problem with low boiler pressure is to repressurise the system. This can usually be done yourself without the need to call a Gas Safe engineer, but you should always check the user guide first to ensure that your model allows this. Turn off the boiler.

What does fault code E119 on Baxi mean?

As we can see here the fault code on the front of the boiler is flashing E119 and E119 on Baxi means low water pressure, so you’d just have a look at your gauge there and you would see that it’s below into the red, which means that the pressure needs to be topped up. What we’ll do here, we’ll show you how to do this.

Why does my Baxi duo TEC boiler show E119?

The last week, EVERY Morning without fail I have had to re-pressurise the boiler as it showed E119 error code and we had no hot water. I topped up the pressure by opening the valve under the boiler and re-pressurising to approx 2.5 bar…

How long to repressurise a Baxi combi boiler?

It depends on the current pressure of your combi boiler. You will need to flush water in the valves for around 10 seconds. This will be fair enough to get back your boiler in the normal pressure again. If it takes more than 10 seconds, you should consider it as there is a leakage in the system.

Why is my Baxi eco 25 boiler not pressurising?

Hope you can help as I’m freezing!! Lived in my flat for about 4 years and my Baxi Eco 25 has needed re-pressurising on a few occasions after getting the E119 error message. I’ve come home tonight to a cold flat and the E119 message but when I have gone to re-pressurise the system isn’t not doing it.