Useful tips

Is Western red cedar good for fencing?

Is Western red cedar good for fencing?

Western Red Cedar is strong and durable. It’s very stable and isn’t likely to shrink or warp after installation. It contains oils that make it naturally resistant to insects and rot for a long-lasting fence.

What size are cedar fence pickets?

This 1 x 6 x 6′ dog-ear cedar fence picket is naturally resistant to decay and is highly durable when exposed to the weather. Cedar fencing provides an unmatched appealing curb side look while also increasing your overall privacy.

How much does a cedar fence picket cost?

Cost of Cedar Picket Fence

Cedar Picket Fence Costs Zip Code
Basic Best
Cedar Picket Fence – Material Prices $444.00 – $525.60 $680.40 – $840.00
Cedar Picket Fence – Installation Cost $168.00 – $180.00 $228.00 – $288.00
Cedar Picket Fence – Total $612.00 – $705.60 $908.40 – $1128.00

Which is better for a fence redwood or cedar?

Redwood contains a higher level of natural oils, which helps protect the fence over time and reduces maintenance requirements. If you plan to paint your fence, cedar is often the better choice.

What lasts longer cedar or redwood?

Redwood is a harder wood than cedar. Because it is a harder wood it will last longer and is more durable. Redwood has more natural occurring chemicals than cedar. This protects the wood so less maintenance is required over time.

How long does Western Red Cedar fence last?

20 years
A properly installed Western Red Cedar fence should last 20 years.

What size nails do I use for fence pickets?

Fastener length To attach individual pickets to the backer rails, we recommend 8d to 10d nails, 1-1/2 in. ring shank nails or 1-1/4 in. to 1-3/4 in. long screws.

How far apart should fence posts be?

between 8-12 feet
How far apart should fence posts be? In general, T-posts are spaced between 8-12 feet apart, depending on what you’re trying to contain or keep out. Closer spacing is suggested for large livestock, like cattle, while wider spacing is fine for fending off deer and other large pests.

How long does a cedar fence last?

How long will a cedar fence last? If left to weather, it will last approximately 12 years in the ground and 15-20 years above ground.

Should I stain my cedar fence?

If you installed a cedar fence, you can usually stain or seal your fence right away without waiting. In fact, if you wait too long, it may weather too quickly and you’ll have to sand it or wash it with a special cleaner in order to proceed to stain or seal it.

Which lasts longer cedar or redwood?

What are the disadvantages of redwood?

The disadvantages to redwood are its softness which makes it prone to denting. It is also fairly expensive, especially for premium vertical grain or “All Heart” redwood. In addition, high-quality, stainless steel fasteners must be used with redwood. Otherwise you could stain the wood by using cheaper fasteners.

How tall is a cedar Dog Ear fence?

The 6 ft. x 8 ft. Cedar Dog-Ear Fence Panel is made of sturdy western red cedar pickets with 3 rails. This panel is paintable and stainable, and comes fully assembled. Each double-nailed picket measures 6 ft. high x 6 in. wide x 1 in. thick. These panels can help adds to the beauty of your yard and home.

How big is a dog ear fence picket?

Hi Michael, Thank you for your recent inquiry with The Home Depot you are asking for the price for item 5/8 in. x 6 in. x 8 ft. Western Red Cedar Dog-Ear Fence Picket. We would like to advise that you would have to partner with your local or closed Home Depot Store.

What kind of fence board is best for outdoor projects?

Western Red Cedar fence boards provide a beautiful and durable solution for your fencing needs. With its natural tannins, Western Red Cedar resists insects and decay making it the natural choice for your outdoor projects. The fence board can be painted. Note: Product may vary by store.

What kind of screws to use on a dog ear fence?

Clean your fence with a cleaner/brightener that contains a mildewcide, prior to applying your finish. For your professional look, use 3 ½” x 10 exterior screws with a T-25 star drive head (the driver bit head comes in the box). Depending on your choice of stain, use tan or green colored coating screws.

https://www.youtube.com/watch?v=RoRQPTKop34