Is Gates a good serpentine belt?

The Gates serpentine belt is a heavy-duty belt with praiseworthy quality and resistance. It’s resistant to heat and cracks, and it’s thicker than most OEM belts. The downside of this product is that the heavy-duty construction comes with a higher price tag than other standard belts.

How do you check that you have bought a genuine Gates product?

CHECK WITH A MAGNIFYING GLASS With a magnifying glass check that a 10-digit code appears under the Gates logo. The last four digits of this 10-digit code correspond to the security code and also the last four digits of the alphanumeric code.

How do you read a gate belt number?

First digit in Gates number corresponds to first two digits of industry standard number. Belt length is to the nearest tenth of an inch. Example: 2450 = 4L450 Belt has 1/2” top width and 45.0” O.C. First two digits indicate belt top width.

What are V belt sizes?

V-Belt Dimensions

Are NAPA belts made by Gates?

There is no difference, they are the same belt. Gates makes the belts for napa.

How long do Gates serpentine belts last?

Serpentine belts are built to last—much longer than before because of advancements in rubber technology. Under ideal conditions, a belt should stick with you for an average of 60,000 to 100,000 miles.

Can barcode be fake?

Applying a fraudulent UPC barcode label over an existing label can happen very fast and an observer can miss it, but knowing what to look for can help a lot. UPC Barcodes may be printed on labels with a special water mark or some other anti-counterfeit material.

What is the difference between fake and original?

The difference might be as small as a change in the font of the text. Look carefully and if it appears flimsy, lacks the brand or logo, has graphics or a name that is similar to but not quite the same, it could be counterfeit. If you are a regular user and have a keen eye, you might be able to spot it in an instant.

What do numbers on V belts mean?

The number following it is the outside length of the belt in tenths of inches. The inside length of the belt is typically 2″ less for a 4L belt, and 1-1/2″ less for a 3L belt. An example would be 4L460, which would be 46″ long outside, 44″ inside. The number following it is the inside length in inches.

How do you read a belt code?

Read the three-digit number after the prefix to identify the belt’s length. For example, if the belt reads 4L460, you know the belt is 12.5mm wide, with a 46-inch outside circumference. Subtract 2 inches for 4L belts or 1 1/2 inches for 3L belts to determine the inside circumference of the belt.

What do numbers on V belt mean?

How to get a serpentine belt cross reference?

SERPENTINE BELT CROSS REFERENCE Customer Service: 800-95-BANDO | [email protected]| www.BandoUSA.com W O R L D C L A S Q U A L I T Y SI N CE 1 9 0 6 Metric 6 Number of Ribs Size of Rib Number of Ribs Length in 10th of an inch Millimeters x 0.03937 = inches Inches x 25.4 = millimeters Metric Pitch – Size of Ribs Number of Ribs

What are the sizes of serpentine K belts?

V-Belt Cross Reference Sizes for 6 Rib K Series Serpentine Belts. Simply, You will find the belts sizes for 6 Rib K Series Belts. Gates, Dayco, Goodyear, Bando, Cadna, Pix, and more belt cross references available.

Where can I get a Gates v belt cross reference?

Below is a list of our Gates v-belt cross reference pages and PDF downloads for various types of Gates v-belts. Please click on the type of Gates belt you would like a cross reference for and you will be directed to a page where we have a PDF to download at your convenience.

What do serpentine belts do for a car?

Using some of the most advanced materials and serpentine belt technologies available, Gates Micro-V® Belts are engineered to power your progress, and enhance vehicle performance.

https://www.youtube.com/watch?v=MvL4RazDzOU