How do you unlock a Siemens thermostat?
How do you unlock a Siemens thermostat?
Press operating mode button for 7 seconds to lock or unlock the buttons if manual button lock is configured (parameter P14 = 2). The thermostat automatically locks the buttons 30 seconds after the last adjustment if “Auto lock” is configured (P14 = 1). The key symbol indicates locked buttons.
How do I set the time on a Siemens thermostat?
Set the first switch-off time (first energy saving time) 2. Turn the setting knob counterclockwise – to decrease the time or clockwise + to increase the time. 3. When the required switch off time is displayed, move the programming selector to any other position to confirm the setting.
How do you unlock Hotwire underfloor heating?
Simply adjust the temperature using the arrows. In Auto mode, the thermostat executes the preprogrammed schedules. To lock the keypad, press and hold the power button for 5 seconds, you will see a lock symbol . To unlock, repeat the steps above and the lock symbol will disappear.
How does the rde20.1 room temperature control work?
The RDE20.1 can provide control either according to the internal room temperature or according to a remote temperature. The controller detects automatically when a QAH11 is connected. In this case, the internal temperature sensor is deactivated. Operating modes The RDE20.1 provides normal operation and, optionally, energy saving mode or OFF.
How to set the clock on the RDE?
RDE… Simple Instructions. Front Panel: Programming Buttons Programmed Heating Constant Heating (Manual) Economy Heating Temperature or OFF Controls under the cover on the right hand side. TO SET CLOCK Press the Clock Button Adjust to the current time, using the plus and minus buttons (please note: the clock is in 24 hour time)
Which is the lowest temperature on the RDE?
The Economy Temperature is the lowest temperature you ever want the floor to get to at anytime. Press the moon button. Adjust to the required temperature using the plus and minus buttons Once the desired temperature is chosen push the enter button or wait for 5 seconds.