How do you start a Craftsman power washer?

Pull the quick connect hose nozzle backward and push a garden hose into the opening, then the quick connecter to fasten the hose. Turn the water faucet clockwise to turn the water flow on. Press the toggle switch to the ‘on’ position to turn the power washer on.

Why is my Craftsman pressure washer won’t start?

The carburetor might be clogged. A clogged carburetor is most commonly caused by leaving fuel in the pressure washer for a long period of time. If the carburetor is clogged, try cleaning it with carburetor cleaner. If cleaning the carburetor isn’t effective, rebuild or replace the entire carburetor.

What kind of oil does my Craftsman pressure washer take?

You can use 5w30, 10w30 or SAE30wt oil depending on the ambient temperature. In ambient temperatures of 55-above SAE30 wt is recommended.

Do you turn water on before starting pressure washer?

It should not be hooked to a potable water source. Turn on the water. The pressure washer hose will fill with water, so it is important to purge the system of excess air before starting the unit. Simply squeeze the trigger on the gun and the air will release.

How do you start a power washer that won’t start?

When the pressure washer runs out of gas, then, the fuel pump overheats and needs to be replaced. You can try to get the pressure washer started again by removing the spark plug, putting about a tablespoon of gasoline or lighter fluid in the socket, replacing and reattaching the spark plug, and trying to start it.

What kind of oil do I put in my pressure washer?

Most pressure washer pumps use SAE 10W-30 or SAE 10W-40 oil. However, you should always check the manufacturer’s recommendation for pump oil, and avoid using your pressure washer on freezing-cold winter days and the hottest days of the year.

What causes a pressure washer not to start?

A clogged carburetor is most commonly caused by leaving fuel in the pressure washer for a long period of time. This sticky fuel can clog up the carburetor and prevent the engine from starting. If the carburetor is clogged, try cleaning it with carburetor cleaner.

Is it OK to run a power washer without water?

Although you can start a pressure washer without water, it is not advisable to do it. The water helps to lubricate the pump and help to keep it cool. Without the lubrication and cooling properties of the water, dry starting will cause the pump to wear down quickly.

Can I use SAE 30 in my pressure washer?

This SAE 30 oil is specially formulated for use in pressure washer pumps. It will help your pressure washer pump run smoothly, and it will prevent excessive friction which can damage your power washer.