How do you remove wax from ski edges?

A ski wax iron may be used or a household iron set around the wool to cotton setting may be used. If the wax smokes excessively, the iron is set too hot. Also, the wax should go on clean, not showing any signs of burning. Let the skis cool for about 15 minutes, then scrape off the wax using the plexiglass scraper.

How do you remove old kick wax?

Cleaning Kick Wax

1. Scrape as much kick wax off the ski as possible using a plastic scraper.
2. For klister, pressing a layer of toilet paper into the klister will make it easier to remove with a scraper.
3. Dampen a paper towel or Fiberlene with wax remover and run it along the kick zone to remove the remaining wax and dirt.

How do you remove old wax from XC skis?

Scrape as much of the kick wax off as possible using a plastic scraper and conservative pressure. Run down one side of the groove, then the other, to remove all excess kick wax. Dampen a paper towel with the wax remover solution. Run the paper towel along the kick zone only, to remove remaining wax and dirt.

What is wax remover?

WAX REMOVER is an alkaline-based wax stripper for deep removal of organic dirt, greasy surface stains, and greasy dirt, even if stubborn or old. It is also effective on mould, algae and bio residues. WAX REMOVER can be used – if correctly diluted – on all types of floor or surface.

Is it possible to over wax skis?

The simple answer is yes – you can’t wax a pair of skis too much (although you can do it at the wrong iron temperature which can damage the base). Regular waxing also helps clean the impurities out of the pores in the base, something else that can slow the skis down.

Can you over wax your skis?

What happens if you don’t scrape wax off skis?

If you skip scraping, the wax will eventually come off while skiing, but instead of it being scraped and brushed off, it is going to get ripped out of the base. The wax will come off in chunks, and the pores in the base won’t have any wax in them, which completely opposes the point of waxing.

How do you remove sticky wax from cross country skis?

Can you wax Waxless XC skis?

Of course you always have the option of hot waxing the tips and tails of your waxless skis. While this is more involved and takes more time, hot waxing often provides a more durable and often faster wax job. Plus, you can also more closely match your choice of glide wax with the snow temperature.

How do you remove GiGi wax?

Simply apply GiGi Wax Off to the skin where residue remains after your hair removal sesh, rub gently with fingertips to loosen wax and wipe clean with a tissue to restore the skin’s moisture. NO TO SKIN IRRITATION AND REDNESS AFTER WAXING: GiGi Wax Off helps subside any skin redness and irritation caused by epilation.

When to use no wax or Klister skis?

With these conditions, snow will not stick into the hard wax, which results in no kick. Because klister is so much softer and stickier, offering so much more of a cushion, it becomes effective in wet, ice and slush. In slushy or really wet conditions, “no wax” skis work quite well too, but they do not work as well in icy conditions.

How can I get stickier wax on my skis?

To apply your stickier wax, simply follow the same procedure as detailed above. Ensure the base of the skis are dry and free from snow/ice particles and crayon the wax over the existing wax layer in your wax pocket. Test this stickier wax on the trail.

Do you have to warm up Klister wax before applying?

Klister wax expands when it warms up, increasing the likelihood of the product overflowing from a conventional twist-off container. Liquid and spray-on klister wax doesn’t need to be warmed up prior to application. This reduces time and allows you to apply the wax both indoors and outdoors.

Where do I put Klister on my skis?

Klister should be applied in the same area of the skis as kick or hard wax, except perhaps over a bit shorter length. To apply klister, heat up the tube with a propane torch, heat gun or even a heater or car heat vent.