How do you maintain La Pavoni?

Deep cleaning of a “La Pavoni” Now that the machine is dismantled, we will be able to proceed with the cleaning. Clean all gaskets, the inside of the piston body with degreaser soap and water. You can help with utensils such as a toothpaste or a rag. Dip the copper pipe in vinegar for 15 to 20 minutes.

How do you clean Europiccola?

To descale, you just heat up the machine and pull about 8 oz of water out through the group head. Then add 1 TBSP of citric acid, dissolve and pour it back into the boiler. Let it sit for an hour or so and repeat a couple of times (if needed). Wash the machine out a few times and you are good.

How do you remove La Pavoni sight glass?

Take a piece of tape and fold the first part together in order to slide it between the glass and the metal protector. Use another piece for the other side, and then attach both pieces together. Now you are able to push and pull the tube with more force then when using your fingers.

How do you polish La Pavoni?

You can try scrunched up aluminium baking foil lubricated with washing up liquid, but do try it on an inconspicuous area before using (some machine seem to have a softer chrome than others) Finish off with the wet cloth on a hot machine as above.

How do I descale my Europiccola?

Descaling La Pavoni – Problems

1. Fill tank with water.
2. Add descaler, as described by manufacturer (I’m using Oust)
3. Turn on La Pavoni but not quite to boil point, just before, then turn off.
4. Leave 30 minutes.
5. Empty, and rinse.
6. Carefully noting not to push the water / descaler through the machine.

How do you use Dezcal?

Dissolve 1 packet (28g) of Dezcal Descaling Powder into 32oz (1 liter) of lukewarm water. Pour the descaling solution into the machine’s water reservoir. Brew a full tank of the descaling solution and discard. Refill the water tank with fresh water and brew a full tank.

How do you use Simichrome?

Apply a little Simichrome to a clean soft cloth. Rub gently in a circular motion on surface to be polished. Continue rubbing until luster begins to emerge. Wipe away the grime and polish.

Where can I find the La Pavoni manual?

Yours may be engineered a little differently, but you can apply most of the troubleshooting techniques to any machine. You should always go by the manual that came with your machine. Manuals for the newer machines can be found at the official la Pavoni site/Domestic line.

How to disassemble a La Pavoni coffee machine?

Disassemble a “La Pavoni” machine Disconnect the electricity and when the machine is cold, empty the water from the boiler. Using two wrenches of 14, unscrew the two nuts above the piston holding the lever. Remember to identify the nuts that have been removed to avoid losing or mixing them.

Is there a warranty on a Pavoni machine?

If you have no mechanical skills, get a friend who does, and is willing to do the repairs for you. All new Pavoni machines have a 1 yr. warranty. You may be able to get your problem fixed for free. Check your purchase date on your sales receipt.

How do you change the piston on a La Pavoni?

Once everything is well greased, replace the piston in the piston body. It’s a little complicated, the joints are tight. You can use a screwdriver to help you by forcing a bit. With a shank, well guide the openings for the pins. Place the correct seal around the shower. Insert the shower and gasket into the piston body.