How do you lower the blade on a Scotts reel mower?

Locate the adjustment levers between the mower wheels and the frame of the mower. Pull the adjustment lever toward the wheel to disengage the lever from the adjustment plate. Move the lever up or down to the desired cutting height, and set the lever back into a notch on the adjustment plate.

How do you adjust the height on a reel mower?

How to Adjust the Cutting Height of a Reel Mower

1. Tilt the mower back so that the mower is resting on the handle and the rear roller.
2. Locate the adjusting lever on each wheel.
3. Push the lever toward the mower blades and adjust the lever up or down to adjust the mowing height.

Can you adjust lawn mower blade height?

Locate the deck adjustment knob on the top of the mower. The knob will be toward the top left rear of the mower and may have a dial indicator on top of the knob. Turn the knob by hand to raise and lower the mower deck. Turn the knob clockwise to lower the deck height and counter-clockwise to raise the deck height.

How often should mower blades be sharpened?

every 20 to 25 hours
On average, a mower blade should be sharpened after every 20 to 25 hours of use time. This depends on how often and how long you mow.

How do you maintain a reel mower?

Reel mowers require very little maintenance outside of regular sharpening. Manual reel mowers are efficient and environmentally friendly, but it’s still a slower option than using a gas mower….Taking Care of Reel Mowers

1. Clean the blades.
2. Wash off excess grass clippings.
3. Keep the mower out of the rain to prevent rusting.

Should reel mower blades touch?

Reel mowers have five twisted cutting blades arranged in a cylinder. The blades and cutting bar must be positioned close together without touching. When adjusted correctly, the blades can cut a strip of paper cleanly, just as you would cut it with a pair of scissors.

Why does my lawn mower mow better backwards?

A push model that mows grass better when pulled in reverse than pushed forward may need to be sharpened. The forward motion of the wheels is what turns the interlocking blades and, when operated in reverse, the blades turn in reverse. Have your mower professionally sharpened to ensure the issue is resolved.

How long do reel mower blades last?

Exploring the Variables Some manufacturers offer suggested time frames for sharpening your reel mower blades, but these recommendations vary significantly — anywhere from one to eight years.

What’s the best way to adjust Scotts reel mower?

The lowest settings are best to use early in the mowing season and for the last cutting in the fall. Scotts Reel Mowers can easily be adjusted in two ways to get the best results. You can adjust the cutting height at the wheels and the blade position to ensure even cutting. Locate the adjustment levers on each rear wheel.

How big is a Scotts reel mower blade?

Compare Similar Reel Lawn Mowers current product Top Rated Assembled Width (in.) 24 in 18 in 19 in 18.5 in Lawn Mower Type Reel Mower Reel Mower Reel Mower Reel Mower Assembly Required Yes Yes Yes Yes Recommended Terrain Flat,Sloped,Uneven Flat,Sloped Flat,Sloped,Uneven Flat

How do you change the cutting height on a Scotts push mower?

Changing the Cutting Height for the Scotts Classic Reel Lawnmower. Changing the cutting height is easy and quick, and requires no tools. You just push in the lever on each side and then let it spring back into place at a different height level. Make sure the height is the same on both sides.

How to adjust the cutting blades of a reel mower?

Turn the reel slowly so the first blade passes over the cutting bar. If the blade cuts the paper cleanly, no further adjustments are needed. Push the paper up and turn it slightly to check the performance of the other four blades.