How do you clear the error log on a Ricoh printer?

If the main power switch is turned off, the log is deleted.

1. Press the [User Tools/Counter] key.
2. Select [Printer Features] using [ ] or [ ], and then press the [OK] key.
3. Select [List/Test Print] using [ ] or [ ], and then press the [OK] key.
4. Select [Error Log] using [ ] or [ ], and then press the [OK] key.

How do I reset my Ricoh printer?

Press the “./*” key and the “#” key on the Ricoh copier at the same time and hold for 10 seconds. The copier will shut down and begin to re-boot. During this process, the Ricoh is resetting itself to factory default settings.

How do I reset my Ricoh mp2000?

Press the “./*” key and the “#” key on the Ricoh copier at the same time and hold for 10 seconds. Nothing will seem to happen until you hold both buttons down for the full 10 seconds. Once 10 seconds is reached, the copier will shut down and begin to re-boot.

What causes a Ricoh error code of sc542?

The error code 542 sc546 sc548 or SC542 could be a caused by a few reasons. There is a temperature problem with the fuser, the roller thermistor is bad. This error has to do with the fuser temperature getting to high or to low.

How to clear service call sc542 Ricoh SP c250sf?

Once the error is reached, the printer is toasting until the error is automatically cleared from the display. You can fix it in some of the simplest processes. Follow the steps below: Pressing the “C” button on the panel. Search to “Engine maintenance” then press “ok”.

Why is my Ricoh roller thermistor not working?

temperature problem with the fuser, the roller thermistor is bad. This error has to do with the fuser temperature getting to high or to low. There is a generic Ricoh rest for this and if you are able to do it, this may clear the error for you. Loading… When autoplay is enabled, a suggested video will automatically play next.

What does maintenance sign mean on Ricoh aficio?

The maintenance sign means that The copier needs to be well serviced and checked if something is to be replaced. Consumables such as drum, blade, fuser rollers, and developer are changed at such times. If you are sure that you have replaced the correct part or nothing is to be replaced, then you can proceed to clear the sign.