How do I reset my Lorex receiver?

If you are able to locate the reset button, follow this procedure to reset the Lorex DVR/NVR to factory default:

1. Power off the DVR/NVR.
2. Press and hold the reset push button.
3. Power on the DVRNVR.
4. Keep the reset push button pressed for 30 seconds.
5. After you see the startup wizard on the screen, create a new password.

Why did my Lorex cameras stop working?

Loss of power is the most common reason why security cameras go black. It happens when power adapter is disconnected and cable that connect the camera to the recorder and monitor becomes loose and faulty. To fix the issue, we recommend that you check any point of contact on your camera, recorder, and monitor.

How long does a Lorex DVR last?

This type of hard drive is designed specifically for security systems. They can run optimally 24 hours a day, 7 days a week, 365 days a year. This is not to say that they will store footage for that long, however….Total Amount of Space Needed.

Why is my Lorex security system beeping?

Depending on your model, your LHV / LNR Series DVR / NVR system is set by default to beep when there are specific errors or events. These include motion alerts, hard disk drive (HDD) warnings, network connectivity warnings, or video loss warnings. Be sure to investigate the nature of each warning and resolve the issue.

How do I get my Lorex camera back online?

To reconnect to the Lorex Home app, launch the Lorex Home app > tap Settings > Wireless Network > then follow your device’s on-screen connection guide.

How do I reset my Lorex admin password?

In the User Settings, click Modify….Then, configure the following settings:

1. User: admin (default)
2. Modify Password: Check the box.
3. Old Password: Enter the temporary password provided to you by the Technical Support.
4. New Password: Enter your new password.
5. Confirm Password: Re-enter your new password.

Did Lorex by FLIR?

As a user of the FLIR Cloud app, we will be moving you over to an updated app called Lorex Cloud to ensure improved connectivity and reliability with your LHV or LNR Series Lorex device.

Why wont my Lorex connect?

If the Lorex Cirrus app is not connecting to your cameras, it may be due to a pending firmware update on your recorder: If installing new firmware does not resolve the issue and you are using an Android device: Please see the instructions below for clearing the app’s data.

Are Lorex cameras always recording?

Lorex DVRs give the user a choice between continuous, motion, alarm, and scheduled recording….Recording Modes.

How do I clear storage on Lorex?

To delete files on the camera microSD card using an iPhone:

1. Launch the Lorex Ping app on your smartphone or tablet.
2. In the Camera List, tap the Playback icon ( ).
3. Tap the name of the camera where the file was recorded.
4. Tap the date of the recording to be deleted.
5. Tap edit in the top-right.
6. Tap the Delete icon (

Do Lorex cameras record all the time?

Lorex DVRs give the user a choice between continuous, motion, alarm, and scheduled recording. NOTE: Certain DVRs also offer Continuous + Motion recording. Will record for 24 hours a day, 7 days a week. Will only record when an external alarm is triggered.

How do I stop my Lorex from beeping?

To disable the beeping, you can connect the system to the Internet….Option 2 of 2: Manually turn off the beeping:

1. From the Main Menu, click and then click Event>Warning>Network.
2. Under Event Type, select Net Disconnect.
3. Uncheck Enable.
4. Click OK to save changes.

Why does my Lorex DVR keep rebooting?

Turn the recorder back on. If it is no longer rebooting, this likely indicates an issue with the hard drive. If the recorder continues rebooting, there may be an issue with the operating system in the recorder. Loading…

Why is my computer not connecting to my Lorex system?

If you still can’t connect, the Ethernet cable might be damaged. Try a different Ethernet cable. Lorex system and computer are not on same network. Your Lorex system and your computer must be connected to the same router to connect using the system’s local IP address.

How do I connect my Lorex DVR to my router?

Follow the steps below to resolve issues connecting to your Lorex DVR or NVR using a PC, Mac, smartphone or tablet. Lorex system is not connected to router. Connect an Ethernet cable from the Lorex system’s LAN or Ethernet port to your router, and turn your system on and off.

What should I do if I Forget my Lorex password?

The first time you connect to your system, enter the default password specified in the Quick Start Guide. The system prompts you to create a personal password, which you will use to connect to the system from now on. If you forget the password for the system, contact Lorex Technical Support for assistance. The IP address is entered incorrectly.